[ Tcllib Home | Main Table Of Contents | Table Of Contents | Keyword Index | Categories | Modules | Applications ]

switched(n) 2.2.1 tcllib "Simple Tcl Only Object Oriented Programming"

Name

switched - switch/option management.

Table Of Contents

Synopsis

  • package require Tcl 8.3
  • package require switched ?2.2.1?

Description

The switched class serves as base class for user classes with switch / option configuration procedures. It provides facilities for managing options through a simple interface.

For example:

set vehicle [new car -length 4.5 -width 2 -power 100 -fuel diesel]
puts "my car was running on [switched::cget $vehicle -fuel]"
switched::configure $vehicle -power 40 -fuel electricity
puts "but is now running on clean [switched::cget $vehicle -fuel]"

Of course, as you might have guessed, the car class is derived from the switched class. Let us see how it works:

class car {
    proc car {this args} switched {$args} {
        # car specific initialization code here
        switched::complete $this
    }
    ...
}

The switched class constructor takes the optional configuration option / value pairs as parameters. The switched class layer then completely manages the switched options: it checks their validity, stores their values and provides a clean interface to the user layer configuration setting procedures.

The switched class members available to the programmer are:

<switched> complete this

This procedure is used to tell the switched layer that the derived class object (a car in the examples) is completely built. At that time, the initial configuration of the switched object occurs, using default option values (see procedure options) eventually overridden by construction time values, passed at the time of the new operator invocation. This procedure must be called only once, usually around or at the end of the derived class constructor. (Note: Also check the complete data member later in this chapter).

<switched> options this

This procedure must return the configuration description for all options that the switched object will accept. It is a pure virtual member procedure and therefore its implementation is mandatory in the derived class layer. The procedure must return a list of lists. Each list pertains to a single option and is composed of the switch name, the default value for the option and an optional initial value. For example:

class car {
    ...
    proc options {this} {
        return [list [list -fuel petrol petrol] [list -length {} {}] [list -power {} {}] [list -width {} {}] ]
    }
    proc set-fuel {this value} {
        ...
    }
    ...
}

In this case, 4 options are specified: fuel, length, power and width. The default and initial values for the fuel option are identical and set to petrol. For the other options, values are all empty.

For each option, there must be a corresponding set-option procedure defined in the derived class layer. For example, since we defined a fuel option, there is a set-fuel procedure in the car class. The parameters always are the object identifier (since this is not a static procedure, but rather a dynamically defined virtual one), followed by the new value for the option. A set-option procedure is only invoked if the new value differs from the current one (a caching scheme for improving performance), or if there is no initial value set in the options procedure for that option.

In this procedure, if the initial value differs from the default value or is omitted, then initial configuration is forced and the corresponding set-option procedure is invoked by the switched complete procedure located at the end of the derived class constructor. For example:

class car {
    ...
    proc options {this} {
        return [list [list -fuel petrol] [list -length {} {}] [list -power 100 50] [list -width {} {}] ]
    }
    ...
}

In this case, configuration is forced on the fuel and power options, that is the corresponding set-option procedures will be invoked when the switched object is constructed (see set-option procedures documentation below).

For the fuel option, since there is no initial value, the set-fuel procedure is called with the default value (petrol) as argument. For the power option, since the initial value differs from the default value, the set-power procedure is called with the initial value as argument (50).

For the other options, since the initial values (last elements of the option lists) are identical to their default values, the corresponding set-option procedures will not be invoked. It is the programmer's responsibility to insure that the initial option values are correct.

<switched> set-option this value

These procedures may be viewed as dynamic virtual functions. There must be one implementation per supported option, as returned by the options procedure. For example:

class car {
    ...
    proc options {this} {
        return [list ...
            [list -width {} {}] ]
    }
    ...
    proc set-width {this value} {
        ...
    }
    ...
}

Since the -width option was listed in the options procedure, a set-width procedure implementation is provided, which of course would proceed to set the width of the car (and would modify the looks of a graphical representation, for example).

As you add a supported option in the list returned by the options procedure, the corresponding set-option procedure may be called as soon as the switched object is complete, which occurs when the switched level complete procedure is invoked. For example:

class car {
    proc car {this args} switched {args} {
        ...
        switched::complete $this
   }
    ...
    proc options {this} {
        return [list [list -fuel petrol] [list -length 4.5] [list -power 350] [list -width 1.8] ]
    }
    proc set-fuel {this value} {
        ...
    }
    proc set-length {this value} {
        ...
    }
    proc set-power {this value} {
        ...
    }
    proc set-width {this value} {
        ...
    }
}
new car

In this case, a new car is created with no options, which causes the car constructor to be called, which in turns calls the switched level complete procedure after the car object layer is completely initialized. At this point, since there are no initial values in any option list in the options procedure, the set-fuel procedure is called with its default value of petrol as parameter, followed by the set-length call with 4.5 value, set-power with 350 value and finally with set-width with 1.8 as parameter. This is a good way to test the set-option procedures when debugging, and when done, just fill-in the initial option values.

The switched layer checks that an option is valid (that is, listed in the options procedure) but obviously does not check the validity of the value passed to the set-option procedure, which should throw an error (for example by using the Tcl error command) if the value is invalid.

The switched layer also keeps track of the options current values, so that a set-option procedure is called only when the corresponding option value passed as parameter is different from the current value (see data members description).

The data member is an options current value. There is one for each option listed in the options procedure. It is a read-only value which the switched layer checks against when an option is changed. It is rarely used at the layer derived from switched, except in the few cases, such as in the following example:

...
proc car::options {this} {
    return {
        ...
        {-manufacturer {} {}}
        ...
    }
}
proc car::set-manufacturer {this value} {}
proc car::printData {this} {
    puts "manufacturer: $switched::($this,-manufacturer)"
    ...
}

In this case, the manufacturer's name is stored at the switched layer level (this is why the set-manufacturer procedure has nothing to do) and later retrieved in the printData procedure.

The data member (not to be confused with the complete procedure) is a boolean. Its initial value is false and it is set to true at the very end of the switched complete procedure. It becomes useful when some options should be set at construction time only and not dynamically, as the following example shows:

proc car::set-width {this value} {
    if {$switched::($this,complete)} {
        error {option -width cannot be set dynamically}
    }
    ...
}

Bugs, Ideas, Feedback

This document, and the package it describes, will undoubtedly contain bugs and other problems. Please report such in the category stooop of the Tcllib Trackers. Please also report any ideas for enhancements you may have for either package and/or documentation.

Keywords

C++, class, object, object oriented

Category

Programming tools