[ Tcllib Home | Main Table Of Contents | Table Of Contents | Keyword Index | Categories | Modules | Applications ]

doctools_plugin_apiref(n) 1.1 tcllib "Documentation tools"

Name

doctools_plugin_apiref - doctools plugin API reference

Table Of Contents

Synopsis

Description

This document is intended for plugin writers, i.e. developers wishing to write a doctools formatting engine for some output format X.

It specifies the interaction between the doctools package and its plugins, i.e. the interface any doctools formatting engine has to comply with.

This document deals with version 1 of the interface.

A reader who is on the other hand more interested in the markup language itself should start with the doctools language introduction and proceed from there to the formal specifications, i.e. the doctools language syntax and the doctools language command reference.

OVERVIEW

The API for a doctools formatting engine consists of two major sections.

On the one side we have a set of commands through which the plugin is able to query the frontend. These commands are provided by the frontend and linked into the plugin interpreter. Please see section FRONTEND COMMANDS for their detailed specification.

And on the other side the plugin has to provide its own set of commands which will then be called by the frontend in a specific sequence while processing input. They, again, fall into two categories, management and formatting. Please see section PLUGIN COMMANDS and its subsections for their detailed specification.

FRONTEND COMMANDS

This section specifies the set of commands through which a plugin, also known as a doctools formatting engine, is able to query the frontend. These commands are provided by the frontend and linked into the plugin interpreter.

I.e. a doctools formatting engine can assume that all of the following commands are present when any of its own commands (as specified in section PLUGIN COMMANDS) are executed.

Beyond that it can also assume that it has full access to its own safe interpreter and thus is not able to damage the other parts of the processor, nor can it damage the filesystem. It is however able to either kill or hang the whole process, by exiting, or running an infinite loop.

Coming back to the imported commands, all the commands with prefix dt_ provide limited access to specific parts of the frontend, whereas the commands with prefix ex_ provide access to the state of the textutil::expander object which does the main parsing of the input within the frontend. These commands should not be except under very special circumstances.

dt_copyright

Query command. It returns a string containing the copyright information the doctools processor was configured with. The relevant option is -copyright).

dt_file

Query command. It returns the full path of the file containing the input currently processed by the engine. This may be an included file.

dt_mainfile

Query command. It returns the full path of the toplevel file containing the input currently processed by the engine.

dt_fileid

Query command. It returns the name of the file containing the input currently processed by the engine, without path, nor extension.

dt_fmap symfname

Query command. It returns the actual pathname to use in the output in place of the symbolic filename symfname. It will return the unchanged input if no mapping was established for symfname.

The required mappings are established with the method map of a frontend, as explained in section OBJECT METHODS of the documentation for the package doctools.

dt_format

Query command. It returns the name of the format associated with the doctools formatting engine.

dt_imgdata key extensions

Query command. Access to the image map. Looks for an image recorded under the key and having on the specified extension. If a matching image is found its data is returned as the result of the command. Otherwise an empty string is returned.

dt_imgdst key extensions

Query command. Access to the image map. Looks for an image recorded under the key and having on the specified extension. If a matching image is found its destination path in the output is returned as the result of the command. Otherwise an empty string is returned.

dt_imgsrc key extensions

Query command. Access to the image map. Looks for an image recorded under the key and having on the specified extension. If a matching image is found its origin path is returned as the result of the command. Otherwise an empty string is returned.

dt_lnesting

Query command. It returns the number of lists currently open.

dt_module

Query command. It returns the name of the module the input currently processed belongs to.

dt_read file

Controlled filesystem access. Returns contents of file for whatever use desired by the plugin. Only files which are either in the same directory as the file containing the engine, or below it, can be loaded. Trying to load a file outside of this directory causes an error.

dt_source file

Controlled filesystem access. This command allows the doctools formatting engine to load additional Tcl code it may need. Only files which are either in the same directory as the file containing the engine, or below it, can be loaded. Trying to load a file outside of this directory causes an error.

dt_user

Query command. It returns the name of the current user as known to the tcl interpreter the frontend controlling the formatting engine resides in.

ex_cappend text

Appends a string to the output in the current context. This command should rarely be used by macros or application code.

ex_cget varname

Retrieves the value of variable varname, defined in the current context.

ex_cis cname

Determines whether or not the name of the current context is cname.

ex_cname

Returns the name of the current context.

ex_cpop cname

Pops a context from the context stack, returning all accumulated output in that context. The context must be named cname, or an error results.

ex_cpush cname

Pushes a context named cname onto the context stack. The context must be popped by cpop before expansion ends or an error results.

ex_cset varname value

Sets variable varname to value in the current context.

ex_lb ?newbracket?

Returns the current value of the left macro expansion bracket; this is for use as or within a macro, when the bracket needs to be included in the output text. If newbracket is specified, it becomes the new bracket, and is returned.

ex_rb ?newbracket?

Returns the current value of the right macro expansion bracket; this is for use as or within a macro, when the bracket needs to be included in the output text. If newbracket is specified, it becomes the new bracket, and is returned.

PLUGIN COMMANDS

The plugin has to provide its own set of commands which will then be called by the frontend in a specific sequence while processing input. They fall into two categories, management and formatting. Their expected names, signatures, and responsibilities are specified in the following two subsections.

Management commands

The management commands a plugin has to provide are used by the frontend to

  1. initialize and shutdown the plugin

  2. determine the number of passes it has to make over the input

  3. initialize and shutdown each pass

  4. query and initialize engine parameters

After the plugin has been loaded and the frontend commands are established the commands will be called in the following sequence:

    fmt_numpasses -> n
    fmt_listvariables -> vars
    fmt_varset var1 value1
    fmt_varset var2 value2
    ...
    fmt_varset varK valueK
    fmt_initialize
    fmt_setup 1
    ...
    fmt_setup 2
    ...
    ...
    fmt_setup n
    ...
    fmt_postprocess
    fmt_shutdown
    ...

I.e. first the number of passes and the set of available engine parameters is established, followed by calls setting the parameters. That second part is optional.

After that the plugin is initialized, the specified number of passes executed, the final result run through a global post processing step and at last the plugin is shutdown again. This can be followed by more conversions, restarting the sequence at fmt_varset.

In each of the passes, i.e. after the calls of fmt_setup the frontend will process the input and call the formatting commands as markup is encountered. This means that the sequence of formatting commands is determined by the grammar of the doctools markup language, as specified in the doctools language syntax specification.

A different way of looking at the sequence is:

  • First some basic parameters are determined.

  • Then everything starting at the first fmt_varset to fmt_shutdown forms a run, the formatting of a single input. Each run can be followed by more.

  • Embedded within each run we have one or more passes, each starting with fmt_setup and going until either the next fmt_setup or fmt_postprocess is reached.

    If more than one pass is required to perform the formatting only the output of the last pass is relevant. The output of all the previous, preparatory passes is ignored.

The commands, their names, signatures, and responsibilities are, in detail:

fmt_initialize

Initialization/Shutdown. This command is called at the beginning of every conversion run, as the first command of that run. Note that a run is not a pass, but may consist of multiple passes. It has to initialize the general state of the plugin, beyond the initialization done during the load. No return value is expected, and any returned value is ignored.

fmt_listvariables

Initialization/Shutdown and Engine parameters. Second command is called after the plugin code has been loaded, i.e. immediately after fmt_numpasses. It has to return a list containing the names of the parameters the frontend can set to configure the engine. This list can be empty.

fmt_numpasses

Initialization/Shutdown and Pass management. First command called after the plugin code has been loaded. No other command of the engine will be called before it. It has to return the number of passes this engine requires to fully process the input document. This value has to be an integer number greater or equal to one.

fmt_postprocess text

Initialization/Shutdown. This command is called immediately after the last pass in a run. Its argument is the result of the conversion generated by that pass. It is provided to allow the engine to perform any global modifications of the generated document. If no post-processing is required for a specific format the command has to just return the argument.

Expected to return a value, the final result of formatting the input.

fmt_setup n

Initialization/Shutdown and Pass management. This command is called at the beginning of each pass over the input in a run. Its argument is the number of the pass which has begun. Passes are counted from 1 upward. The command has to set up the internal state of the plugin for this particular pass. No return value is expected, and any returned value is ignored.

fmt_shutdown

Initialization/Shutdown. This command is called at the end of every conversion run. It is the last command called in a run. It has to clean up of all the run-specific state in the plugin. After the call the engine has to be in a state which allows the initiation of another run without fear that information from the last run is leaked into this new run. No return value is expected, and any returned value is ignored.

fmt_varset varname text

Engine parameters. This command is called by the frontend to set an engine parameter to a particular value. The parameter to change is specified by varname, the value to set in text.

The command has to throw an error if an unknown varname is used. Only the names returned by fmt_listvariables have to be considered as known.

The values of all engine parameters have to persist between passes and runs.

Formatting commands

The formatting commands have to implement the formatting for the output format, for all the markup commands of the doctools markup language, except lb, rb, vset, include, and comment. These exceptions are processed by the frontend and are never seen by the plugin. In return a command for the formatting of plain text has to be provided, something which has no markup in the input at all.

This means, that each of the 49 markup commands specified in the doctools language command reference and outside of the set of exceptions listed above has an equivalent formatting command which takes the same arguments as the markup command and whose name is the name of markup command with the prefix fmt_ added to it.

All commands are expected to format their input in some way per the semantics specified in the command reference and to return whatever part of this that they deem necessary as their result, which will be added to the output.

To avoid essentially duplicating the command reference we do not list any of the command here and simply refer the reader to the doctools language command reference for their signature and description. The sole exception is the plain text formatter, which has no equivalent markup command.

The calling sequence of formatting commands is not as rigid as for the management commands, but determined by the grammar of the doctools markup language, as specified in the doctools language syntax specification.

fmt_plain_text text

No associated markup command.

Called by the frontend for any plain text encountered in the input. It has to perform any and all special processing required for plain text.

The formatted text is expected as the result of the command, and added to the output. If no special processing is required it has to simply return its argument without change.

Bugs, Ideas, Feedback

This document, and the package it describes, will undoubtedly contain bugs and other problems. Please report such in the category doctools of the Tcllib Trackers. Please also report any ideas for enhancements you may have for either package and/or documentation.

See Also

doctools, doctools_intro, doctools_lang_cmdref, doctools_lang_faq, doctools_lang_intro, doctools_lang_syntax

Keywords

document, formatter, formatting engine, manpage, markup, semantic markup

Category

Documentation tools