Index: .fossil-settings/crlf-glob ================================================================== --- .fossil-settings/crlf-glob +++ .fossil-settings/crlf-glob @@ -10,8 +10,10 @@ tools/tcl.wse.in win/buildall.vc.bat win/coffbase.txt win/makefile.vc win/rules.vc +win/rules-ext.vc +win/targets.vc win/tcl.dsp win/tcl.dsw win/tcl.hpj.in Index: .fossil-settings/crnl-glob ================================================================== --- .fossil-settings/crnl-glob +++ .fossil-settings/crnl-glob @@ -10,8 +10,10 @@ tools/tcl.wse.in win/buildall.vc.bat win/coffbase.txt win/makefile.vc win/rules.vc +win/rules-ext.vc +win/targets.vc win/tcl.dsp win/tcl.dsw win/tcl.hpj.in Index: win/makefile.vc ================================================================== --- win/makefile.vc +++ win/makefile.vc @@ -1,49 +1,27 @@ -#------------------------------------------------------------- -# makefile.vc -- +#------------------------------------------------------------- -*- makefile -*- # -# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+) +# Microsoft Visual C++ makefile for building Tcl with nmake # # See the file "license.terms" for information on usage and redistribution # of this file, and for a DISCLAIMER OF ALL WARRANTIES. # # Copyright (c) 1995-1996 Sun Microsystems, Inc. # Copyright (c) 1998-2000 Ajuba Solutions. # Copyright (c) 2001-2005 ActiveState Corporation. # Copyright (c) 2001-2004 David Gravereaux. # Copyright (c) 2003-2008 Pat Thoyts. -#------------------------------------------------------------------------------ - -# Check to see we are configured to build with MSVC (MSDEVDIR, MSVCDIR or -# VCINSTALLDIR) or with the MS Platform SDK (MSSDK or WindowsSDKDir) -!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR) -MSG = ^ -You need to run vcvars32.bat from Developer Studio or setenv.bat from the^ -Platform SDK first to setup the environment. Jump to this line to read^ -the build instructions. -!error $(MSG) -!endif - -#------------------------------------------------------------------------------ -# HOW TO USE this makefile: -# -# 1) It is now necessary to have MSVCDir, MSDevDir or MSSDK set in the -# environment. This is used as a check to see if vcvars32.bat had been -# run prior to running nmake or during the installation of Microsoft -# Visual C++, MSVCDir had been set globally and the PATH adjusted. -# Either way is valid. -# -# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin -# directory to setup the proper environment, if needed, for your -# current setup. This is a needed bootstrap requirement and allows the -# swapping of different environments to be easier. -# -# 2) To use the Platform SDK (not expressly needed), run setenv.bat after -# vcvars32.bat according to the instructions for it. This can also -# turn on the 64-bit compiler, if your SDK has it. -# -# 3) Targets are: +# Copyright (c) 2017 Ashok P. Nadkarni +#------------------------------------------------------------------------------ + +# General usage: +# nmake [-nologo] -f makefile.vc [TARGET|MACRODEF [TARGET|MACRODEF] [...]] +# +# For MACRODEF, see TIP 477 (https://core.tcl.tk/tips/doc/trunk/tip/477.md) +# or examine Sections 6-8 in rules.vc. +# +# Possible values of TARGET are: # release -- Builds the core, the shell and the dlls. (default) # dlls -- Just builds the windows extensions # shell -- Just builds the shell and the core. # core -- Only builds the core [tclXX.(dll|lib)]. # all -- Builds everything. @@ -59,183 +37,96 @@ # headers like tclInt.h just get small changes. # htmlhelp -- Builds a Windows .chm help file for Tcl and Tk from the # troff manual pages found in $(ROOT)\doc. You need to # have installed the HTML Help Compiler package from Microsoft # to produce the .chm file. -# winhelp -- (deprecated) Builds the windows .hlp file for Tcl from -# the troff man files found in $(ROOT)\doc. This type of -# help file is deprecated by Microsoft in favour of html -# help files (.chm) -# -# 4) Macros usable on the commandline: -# INSTALLDIR= -# Sets where to install Tcl from the built binaries. -# C:\Progra~1\Tcl is assumed when not specified. -# -# OPTS=loimpact,msvcrt,nothreads,pdbs,profile,static,staticpkg,symbols,thrdalloc,tclalloc,unchecked,none -# Sets special options for the core. The default is for none. -# Any combination of the above may be used (comma separated). -# 'none' will over-ride everything to nothing. -# -# loimpact = Adds a flag for how NT treats the heap to keep memory -# in use, low. This is said to impact alloc performance. -# msvcrt = Affects the static option only to switch it from -# using libcmt(d) as the C runtime [by default] to -# msvcrt(d). This is useful for static embedding -# support. -# nothreads= Turns off full multithreading support. -# pdbs = Build detached symbols for release builds. -# profile = Adds profiling hooks. Map file is assumed. -# static = Builds a static library of the core instead of a -# dll. The static library will contain the dde and reg -# extensions. External applications who want to use -# this, need to link with the stub library as well as -# the static Tcl library.The shell will be static (and -# large), as well. -# staticpkg = Affects the static option only to switch -# tclshXX.exe to have the dde and reg extension linked -# inside it. -# symbols = Debug build. Links to the debug C runtime, disables -# optimizations and creates pdb symbols files. -# thrdalloc = Use the thread allocator (shared global free pool) -# This is the default on threaded builds. -# tclalloc = Use the old non-thread allocator -# unchecked= Allows a symbols build to not use the debug -# enabled runtime (msvcrt.dll not msvcrtd.dll -# or libcmt.lib not libcmtd.lib). -# -# STATS=compdbg,memdbg,none -# Sets optional memory and bytecode compiler debugging code added -# to the core. The default is for none. Any combination of the -# above may be used (comma separated). 'none' will over-ride -# everything to nothing. -# -# compdbg = Enables byte compilation logging. -# memdbg = Enables the debugging memory allocator. -# -# CHECKS=64bit,fullwarn,nodep,none -# Sets special macros for checking compatibility. -# -# 64bit = Enable 64bit portability warnings (if available) -# fullwarn = Builds with full compiler and link warnings enabled. -# Very verbose. -# nodep = Turns off compatibility macros to ensure the core -# isn't being built with deprecated functions. -# -# MACHINE=(ARM|AMD64|IA64|IX86) -# Set the machine type used for the compiler, linker, and -# resource compiler. This hook is needed to tell the tools -# when alternate platforms are requested. IX86 is the default -# when not specified. If the CPU environment variable has been -# set (ie: recent Platform SDK) then MACHINE is set from CPU. -# -# TMP_DIR= -# OUT_DIR= -# Hooks to allow the intermediate and output directories to be -# changed. $(OUT_DIR) is assumed to be -# $(BINROOT)\(Release|Debug) based on if symbols are requested. -# $(TMP_DIR) will de $(OUT_DIR)\ by default. -# -# TESTPAT= -# Reads the tests requested to be run from this file. -# -# CFG_ENCODING=encoding -# name of encoding for configuration information. Defaults -# to cp1252 -# -# 5) Examples: -# -# Basic syntax of calling nmake looks like this: -# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]] -# -# Standard (no frills) -# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat -# Setting environment for using Microsoft Visual C++ tools. -# c:\tcl_src\win\>nmake -f makefile.vc release -# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl -# -# Building for Win64 -# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat -# Setting environment for using Microsoft Visual C++ tools. -# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL -# Targeting Windows pre64 RETAIL -# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64 -# -#------------------------------------------------------------------------------ -#============================================================================== -############################################################################### - - -# //==================================================================\\ -# >>[ -> Do not modify below this line. <- ]<< -# >>[ Please, use the commandline macros to modify how Tcl is built. ]<< -# >>[ If you need more features, send us a patch for more macros. ]<< -# \\==================================================================// - - -############################################################################### -#============================================================================== -#------------------------------------------------------------------------------ - -!if !exist("makefile.vc") -MSG = ^ -You must run this makefile only from the directory it is in.^ -Please `cd` to its location first. -!error $(MSG) -!endif - -PROJECT = tcl +# +# The steps to setup a Visual C++ environment depend on which +# version of Visual Studio and/or the Windows SDK you are building +# against and are not described here. The simplest method is generally +# to start a command shell using one of the short cuts installed by +# Visual Studio/Windows SDK for the appropriate target architecture. +# +# NOTE: For older (Visual C++ 6 or the 2003 SDK), to use the Platform +# SDK (not expressly needed), run setenv.bat after +# vcvars32.bat according to the instructions for it. This can also +# turn on the 64-bit compiler, if your SDK has it. +# +# Examples: +# c:\tcl_src\win\>nmake -f makefile.vc release +# c:\tcl_src\win\>nmake -f makefile.vc test +# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl +# c:\tcl_src\win\>nmake -f makefile.vc release OPTS=pdbs +# c:\tcl_src\win\>nmake -f makefile.vc release OPTS=symbols +# + +# NOTE: +# Before modifying this file, check whether the modification is applicable +# to building extensions as well and if so, modify rules.vc instead. + +# The PROJECT macro is used by rules.vc for generating appropriate +# macros and rules. +PROJECT = tcl + +# Default target to build if no target is specified. If unspecified, the +# rules.vc file will set up "all" as the target. +DEFAULT_BUILD_TARGET = release + +# We want to use our own resource file, not the standard template one. +RCFILE = tcl.rc + +# The rules.vc file does most of the hard work in terms of defining +# the build configuration, macros, output directories etc. !include "rules.vc" -STUBPREFIX = $(PROJECT)stub +# Tcl version info based on macros set up by rules.vc DOTVERSION = $(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION) VERSION = $(TCL_MAJOR_VERSION)$(TCL_MINOR_VERSION) + +# We need versions of various core packages to generate appropriate +# file names during installation. +!if [echo REM = This file is generated from makefile.vc > versions.vc] +!endif +!if [echo PKG_HTTP_VER = \>> versions.vc] \ + && [nmakehlp -V ..\library\http\pkgIndex.tcl http >> versions.vc] +!endif +!if [echo PKG_TCLTEST_VER = \>> versions.vc] \ + && [nmakehlp -V ..\library\tcltest\pkgIndex.tcl tcltest >> versions.vc] +!endif +!if [echo PKG_MSGCAT_VER = \>> versions.vc] \ + && [nmakehlp -V ..\library\msgcat\pkgIndex.tcl msgcat >> versions.vc] +!endif +!if [echo PKG_PLATFORM_VER = \>> versions.vc] \ + && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform " >> versions.vc] +!endif +!if [echo PKG_SHELL_VER = \>> versions.vc] \ + && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform::shell" >> versions.vc] +!endif +!if [echo PKG_DDE_VER = \>> versions.vc] \ + && [nmakehlp -V ..\library\dde\pkgIndex.tcl "dde " >> versions.vc] +!endif +!if [echo PKG_REG_VER =\>> versions.vc] \ + && [nmakehlp -V ..\library\reg\pkgIndex.tcl registry >> versions.vc] +!endif + +!include versions.vc DDEDOTVERSION = 1.4 DDEVERSION = $(DDEDOTVERSION:.=) REGDOTVERSION = 1.3 REGVERSION = $(REGDOTVERSION:.=) -BINROOT = $(MAKEDIR) # originally . -ROOT = $(MAKEDIR)\.. # originally .. - -TCLIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib -TCLLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT) -TCLLIB = $(OUT_DIR)\$(TCLLIBNAME) - -TCLSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib -TCLSTUBLIB = $(OUT_DIR)\$(TCLSTUBLIBNAME) - -TCLSHNAME = $(PROJECT)sh$(VERSION)$(SUFX).exe -TCLSH = $(OUT_DIR)\$(TCLSHNAME) - TCLREGLIBNAME = $(PROJECT)reg$(REGVERSION)$(SUFX:t=).$(EXT) TCLREGLIB = $(OUT_DIR)\$(TCLREGLIBNAME) TCLDDELIBNAME = $(PROJECT)dde$(DDEVERSION)$(SUFX:t=).$(EXT) TCLDDELIB = $(OUT_DIR)\$(TCLDDELIBNAME) TCLTEST = $(OUT_DIR)\$(PROJECT)test.exe CAT32 = $(OUT_DIR)\cat32.exe -# Can we run what we build? IX86 runs on all architectures. -!ifndef TCLSH_NATIVE -!if "$(MACHINE)" == "IX86" || "$(MACHINE)" == "$(NATIVE_ARCH)" -TCLSH_NATIVE = $(TCLSH) -!else -!error You must explicitly set TCLSH_NATIVE for cross-compilation -!endif -!endif - -### Make sure we use backslash only. -LIB_INSTALL_DIR = $(_INSTALLDIR)\lib -BIN_INSTALL_DIR = $(_INSTALLDIR)\bin -DOC_INSTALL_DIR = $(_INSTALLDIR)\doc -SCRIPT_INSTALL_DIR = $(_INSTALLDIR)\lib\tcl$(DOTVERSION) -INCLUDE_INSTALL_DIR = $(_INSTALLDIR)\include - TCLSHOBJS = \ $(TMP_DIR)\tclAppInit.obj \ !if !$(STATIC_BUILD) !if $(TCL_USE_STATIC_PACKAGES) $(TMP_DIR)\tclWinReg.obj \ @@ -452,124 +343,22 @@ TCLSTUBOBJS = \ $(TMP_DIR)\tclStubLib.obj \ $(TMP_DIR)\tclTomMathStubLib.obj \ $(TMP_DIR)\tclOOStubLib.obj -### The following paths CANNOT have spaces in them. -COMPATDIR = $(ROOT)\compat -DOCDIR = $(ROOT)\doc -GENERICDIR = $(ROOT)\generic +### The following paths CANNOT have spaces in them as they appear on +### the left side of implicit rules. TOMMATHDIR = $(ROOT)\libtommath -TOOLSDIR = $(ROOT)\tools -WINDIR = $(ROOT)\win PKGSDIR = $(ROOT)\pkgs -#--------------------------------------------------------------------- -# Compile flags -#--------------------------------------------------------------------- - -!if !$(DEBUG) -!if $(OPTIMIZING) -### This cranks the optimization level to maximize speed -cdebug = -O2 $(OPTIMIZATIONS) -!else -cdebug = -!endif -!if $(SYMBOLS) -cdebug = $(cdebug) -Zi -!endif -!else if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64" -### Warnings are too many, can't support warnings into errors. -cdebug = -Zi -Od $(DEBUGFLAGS) -!else -cdebug = -Zi -WX $(DEBUGFLAGS) -!endif - -### Common compiler options that are architecture specific -!if "$(MACHINE)" == "ARM" -carch = -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE -!else -carch = -!endif - -### Declarations common to all compiler options -cwarn = $(WARNINGS) -D _CRT_SECURE_NO_DEPRECATE -D _CRT_NONSTDC_NO_DEPRECATE -cflags = -nologo -c $(COMPILERFLAGS) $(carch) $(cwarn) -Fp$(TMP_DIR)^\ - -!if $(MSVCRT) -!if $(DEBUG) && !$(UNCHECKED) -crt = -MDd -!else -crt = -MD -!endif -!else -!if $(DEBUG) && !$(UNCHECKED) -crt = -MTd -!else -crt = -MT -!endif -!endif - -TCL_INCLUDES = -I"$(WINDIR)" -I"$(GENERICDIR)" -I"$(TOMMATHDIR)" -TCL_DEFINES = -DTCL_TOMMATH -DMP_PREC=4 -Dinline=__inline -DHAVE_ZLIB=1 -BASE_CFLAGS = $(cflags) $(cdebug) $(crt) $(TCL_INCLUDES) $(TCL_DEFINES) -CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE -TCL_CFLAGS = $(BASE_CFLAGS) $(OPTDEFINES) -STUB_CFLAGS = $(cflags) $(cdebug) $(OPTDEFINES) - - -#--------------------------------------------------------------------- -# Link flags -#--------------------------------------------------------------------- - -!if $(DEBUG) -ldebug = -debug -debugtype:cv -!else -ldebug = -release -opt:ref -opt:icf,3 -!if $(SYMBOLS) -ldebug = $(ldebug) -debug -debugtype:cv -!endif -!endif - -### Declarations common to all linker options -lflags = -nologo -machine:$(MACHINE) $(LINKERFLAGS) $(ldebug) - -!if $(PROFILE) -lflags = $(lflags) -profile -!endif - -!if $(MSVCRT) && !($(DEBUG) && !$(UNCHECKED)) && $(VCVERSION) >= 1900 -lflags = $(lflags) -nodefaultlib:libucrt.lib -!endif - -!if $(ALIGN98_HACK) && !$(STATIC_BUILD) -### Align sections for PE size savings. -lflags = $(lflags) -opt:nowin98 -!else if !$(ALIGN98_HACK) && $(STATIC_BUILD) -### Align sections for speed in loading by choosing the virtual page size. -lflags = $(lflags) -align:4096 -!endif - -!if $(LOIMPACT) -lflags = $(lflags) -ws:aggressive -!endif - -dlllflags = $(lflags) -dll -conlflags = $(lflags) -subsystem:console -guilflags = $(lflags) -subsystem:windows - -baselibs = netapi32.lib kernel32.lib user32.lib advapi32.lib userenv.lib ws2_32.lib -# Avoid 'unresolved external symbol __security_cookie' errors. -# c.f. http://support.microsoft.com/?id=894573 -!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64" -!if $(VCVERSION) > 1399 && $(VCVERSION) < 1500 -baselibs = $(baselibs) bufferoverflowU.lib -!endif -!endif -!if $(MSVCRT) && !($(DEBUG) && !$(UNCHECKED)) && $(VCVERSION) >= 1900 -baselibs = $(baselibs) ucrt.lib -!endif +# Additional include and C macro definitions for the implicit rules +# defined in rules.vc +PRJ_INCLUDES = -I"$(TOMMATHDIR)" +PRJ_DEFINES = -DTCL_TOMMATH -DMP_PREC=4 -Dinline=__inline -DHAVE_ZLIB=1 -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE + +# Additional Link libraries needed beyond those in rules.vc +PRJ_LIBS = netapi32.lib user32.lib userenv.lib ws2_32.lib #--------------------------------------------------------------------- # TclTest flags #--------------------------------------------------------------------- @@ -587,85 +376,73 @@ shell: setup $(TCLSH) dlls: setup $(TCLREGLIB) $(TCLDDELIB) all: setup $(TCLSH) $(TCLSTUBLIB) dlls $(CAT32) pkgs tcltest: setup $(TCLTEST) dlls $(CAT32) install: install-binaries install-libraries install-docs install-pkgs +setup: default-setup test: test-core test-pkgs test-core: setup $(TCLTEST) dlls $(CAT32) set TCL_LIBRARY=$(ROOT:\=/)/library -!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE" $(DEBUGGER) $(TCLTEST) "$(ROOT:\=/)/tests/all.tcl" $(TESTFLAGS) -loadfile << package ifneeded dde 1.4.0 [list load "$(TCLDDELIB:\=/)" dde] package ifneeded registry 1.3.2 [list load "$(TCLREGLIB:\=/)" registry] << -!else - @echo Please wait while the tests are collected... - $(TCLTEST) "$(ROOT:\=/)/tests/all.tcl" $(TESTFLAGS) -loadfile << > tests.log - package ifneeded dde 1.4.0 "$(TCLDDELIB:\=/)" dde] - package ifneeded registry 1.3.2 "$(TCLREGLIB:\=/)" registry] -<< - type tests.log | more -!endif runtest: setup $(TCLTEST) dlls $(CAT32) set TCL_LIBRARY=$(ROOT:\=/)/library $(DEBUGGER) $(TCLTEST) $(SCRIPT) runshell: setup $(TCLSH) dlls set TCL_LIBRARY=$(ROOT:\=/)/library $(DEBUGGER) $(TCLSH) $(SCRIPT) -setup: - @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) - @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) +!if $(STATIC_BUILD) -!if !$(STATIC_BUILD) -$(TCLIMPLIB): $(TCLLIB) -!endif +$(TCLLIB): $(TCLOBJS) + $(LIBCMD) @<< +$** +<< + +!else $(TCLLIB): $(TCLOBJS) -!if $(STATIC_BUILD) - $(lib32) -nologo $(LINKERFLAGS) -out:$@ @<< -$** -<< -!else - $(link32) $(dlllflags) -base:@$(WINDIR)\coffbase.txt,tcl -out:$@ \ - $(baselibs) @<< + $(DLLCMD) @<< $** << $(_VC_MANIFEST_EMBED_DLL) -!endif +$(TCLIMPLIB): $(TCLLIB) + +!endif # $(STATIC_BUILD) + $(TCLSTUBLIB): $(TCLSTUBOBJS) - $(lib32) -nologo $(LINKERFLAGS) -nodefaultlib -out:$@ $(TCLSTUBOBJS) + $(LIBCMD) -nodefaultlib $(TCLSTUBOBJS) $(TCLSH): $(TCLSHOBJS) $(TCLSTUBLIB) $(TCLIMPLIB) - $(link32) $(conlflags) -stack:2300000 -out:$@ $(baselibs) $** + $(CONEXECMD) -stack:2300000 $** $(_VC_MANIFEST_EMBED_EXE) $(TCLTEST): $(TCLTESTOBJS) $(TCLSTUBLIB) $(TCLIMPLIB) - $(link32) $(conlflags) -stack:2300000 -out:$@ $(baselibs) $** + $(CONEXECMD) -stack:2300000 $** $(_VC_MANIFEST_EMBED_EXE) !if $(STATIC_BUILD) $(TCLDDELIB): $(TMP_DIR)\tclWinDde.obj - $(lib32) -nologo $(LINKERFLAGS) -out:$@ $** + $(LIBCMD) $** !else $(TCLDDELIB): $(TMP_DIR)\tclWinDde.obj $(TCLSTUBLIB) - $(link32) $(dlllflags) -base:@$(WINDIR)\coffbase.txt,tcldde -out:$@ \ - $** $(baselibs) + $(DLLCMD) $** $(_VC_MANIFEST_EMBED_DLL) !endif !if $(STATIC_BUILD) $(TCLREGLIB): $(TMP_DIR)\tclWinReg.obj - $(lib32) -nologo $(LINKERFLAGS) -out:$@ $** + $(LIBCMD) $** !else $(TCLREGLIB): $(TMP_DIR)\tclWinReg.obj $(TCLSTUBLIB) - $(link32) $(dlllflags) -base:@$(WINDIR)\coffbase.txt,tclreg -out:$@ \ - $** $(baselibs) + $(DLLCMD) $** $(_VC_MANIFEST_EMBED_DLL) !endif pkgs: @for /d %d in ($(PKGSDIR)\*) do \ @@ -698,13 +475,12 @@ $(MAKE) -$(MAKEFLAGS) -f makefile.vc TCLDIR=$(ROOT) clean &\ popd \ ) $(CAT32): $(WINDIR)\cat.c - $(cc32) $(CON_CFLAGS) -Fo$(TMP_DIR)\ $? - $(link32) $(conlflags) -out:$@ -stack:16384 $(TMP_DIR)\cat.obj \ - $(baselibs) + $(cc32) $(cflags) $(crt) -D_CRT_NONSTDC_NO_DEPRECATE -DCONSOLE -Fo$(TMP_DIR)\ $? + $(CONEXECMD) -stack:16384 $(TMP_DIR)\cat.obj $(_VC_MANIFEST_EMBED_EXE) #--------------------------------------------------------------------- # Regenerate the stubs files. [Development use only] #--------------------------------------------------------------------- @@ -738,13 +514,16 @@ #--------------------------------------------------------------------- # Build the Windows HTML help file. #--------------------------------------------------------------------- -# NOTE: you can define HHC on the command-line to override this -!ifndef HHC -HHC=""%ProgramFiles%\HTML Help Workshop\hhc.exe"" +# NOTE: you can define HHC on the command-line to override this. +# nmake does not set macro values if already set on the command line. +!if defined(PROCESSOR_ARCHITECTURE) && "$(PROCESSOR_ARCHITECTURE)" == "AMD64" +HHC="%ProgramFiles(x86)%\HTML Help Workshop\hhc.exe" +!else +HHC="%ProgramFiles%\HTML Help Workshop\hhc.exe" !endif HTMLDIR=$(OUT_DIR)\html HTMLBASE=TclTk$(VERSION) HHPFILE=$(HTMLDIR)\$(HTMLBASE).hhp CHMFILE=$(HTMLDIR)\$(HTMLBASE).chm @@ -752,20 +531,20 @@ htmlhelp: chmsetup $(CHMFILE) $(CHMFILE): $(DOCDIR)\* @$(TCLSH) $(TOOLSDIR)\tcltk-man2html.tcl "--htmldir=$(HTMLDIR)" @echo Compiling HTML help project - -$(HHC) <<$(HHPFILE) >NUL + -"$(HHC)" <<$(HHPFILE) >NUL [OPTIONS] Compatibility=1.1 or later Compiled file=$(HTMLBASE).chm Default topic=contents.htm Display compile progress=no Error log file=$(HTMLBASE).log Full-text search=Yes Language=0x409 English (United States) -Title=Tcl/Tk $(DOT_VERSION) Help +Title=Tcl/Tk $(DOTVERSION) Help [FILES] contents.htm docs.css Keywords\*.htm TclCmd\*.htm @@ -776,114 +555,66 @@ << chmsetup: @if not exist $(HTMLDIR)\nul mkdir $(HTMLDIR) -#------------------------------------------------------------------------- -# Build the old-style Windows .hlp file -#------------------------------------------------------------------------- - -TCLHLPBASE = $(PROJECT)$(VERSION) -HELPFILE = $(OUT_DIR)\$(TCLHLPBASE).hlp -HELPCNT = $(OUT_DIR)\$(TCLHLPBASE).cnt -DOCTMP_DIR = $(OUT_DIR)\$(PROJECT)_docs -HELPRTF = $(DOCTMP_DIR)\$(PROJECT).rtf -MAN2HELP = $(DOCTMP_DIR)\man2help.tcl -MAN2HELP2 = $(DOCTMP_DIR)\man2help2.tcl -INDEX = $(DOCTMP_DIR)\index.tcl -BMP = $(DOCTMP_DIR)\feather.bmp -BMP_NOPATH = feather.bmp -MAN2TCL = $(DOCTMP_DIR)\man2tcl.exe - -winhelp: docsetup $(HELPFILE) - -docsetup: - @if not exist $(DOCTMP_DIR)\nul mkdir $(DOCTMP_DIR) - -$(MAN2HELP) $(MAN2HELP2) $(INDEX) $(BMP): $(TOOLSDIR)\$$(@F) - @$(CPY) $(TOOLSDIR)\$(@F) $(@D) - -$(HELPFILE): $(HELPRTF) $(BMP) - cd $(DOCTMP_DIR) - start /wait hcrtf.exe -x <<$(PROJECT).hpj -[OPTIONS] -COMPRESS=12 Hall Zeck -LCID=0x409 0x0 0x0 ; English (United States) -TITLE=Tcl/Tk Reference Manual -BMROOT=. -CNT=$(@B).cnt -HLP=$(@B).hlp - -[FILES] -$(PROJECT).rtf - -[WINDOWS] -main="Tcl/Tk Reference Manual",,27648,(r15263976),(r65535) - -[CONFIG] -BrowseButtons() -CreateButton(1, "Web", ExecFile("http://www.tcl.tk")) -CreateButton(2, "SF", ExecFile("http://sf.net/projects/tcl")) -CreateButton(3, "Wiki", ExecFile("http://wiki.tcl.tk")) -CreateButton(4, "FAQ", ExecFile("http://www.purl.org/NET/Tcl-FAQ/")) -<< - cd $(MAKEDIR) - @$(CPY) "$(DOCTMP_DIR)\$(@B).hlp" "$(OUT_DIR)" - @$(CPY) "$(DOCTMP_DIR)\$(@B).cnt" "$(OUT_DIR)" - -$(MAN2TCL): $(TOOLSDIR)\$$(@B).c - $(cc32) $(TCL_CFLAGS) -Fo$(@D)\ $(TOOLSDIR)\$(@B).c - $(link32) $(conlflags) -out:$@ -stack:16384 $(@D)\man2tcl.obj - $(_VC_MANIFEST_EMBED_EXE) - -$(HELPRTF): $(MAN2TCL) $(MAN2HELP) $(MAN2HELP2) $(INDEX) $(DOCDIR)\* - $(TCLSH) $(MAN2HELP) -bitmap $(BMP_NOPATH) $(PROJECT) $(VERSION) $(DOCDIR:\=/) - install-docs: !if exist("$(CHMFILE)") @echo Installing compiled HTML help @$(CPY) "$(CHMFILE)" "$(DOC_INSTALL_DIR)\" !endif -!if exist("$(HELPFILE)") - @echo Installing Windows help - @$(CPY) "$(HELPFILE)" "$(DOC_INSTALL_DIR)\" - @$(CPY) "$(HELPCNT)" "$(DOC_INSTALL_DIR)\" -!endif + +# "emacs font-lock highlighting fix + +#--------------------------------------------------------------------- +# Generate the tcl.nmake file which contains the options used to build +# Tcl itself. This is used when building extensions. +#--------------------------------------------------------------------- +tcl-nmake: $(OUT_DIR)\tcl.nmake +$(OUT_DIR)\tcl.nmake: + @type << >$@ +CORE_MACHINE = $(MACHINE) +CORE_DEBUG = $(DEBUG) +CORE_TCL_THREADS = $(TCL_THREADS) +CORE_USE_THREAD_ALLOC = $(USE_THREAD_ALLOC) +CORE_USE_WIDECHAR_API = $(USE_WIDECHAR_API) +<< #--------------------------------------------------------------------- # Build tclConfig.sh for the TEA build system. #--------------------------------------------------------------------- tclConfig: $(OUT_DIR)\tclConfig.sh +# TBD - is this tclConfig.sh file ever used? The values are incorrect! $(OUT_DIR)\tclConfig.sh: $(WINDIR)\tclConfig.sh.in @echo Creating tclConfig.sh @nmakehlp -s << $** >$@ @TCL_DLL_FILE@ $(TCLLIBNAME) @TCL_VERSION@ $(DOTVERSION) @TCL_MAJOR_VERSION@ $(TCL_MAJOR_VERSION) @TCL_MINOR_VERSION@ $(TCL_MINOR_VERSION) @TCL_PATCH_LEVEL@ $(TCL_PATCH_LEVEL) @CC@ $(CC) -@DEFS@ $(TCL_CFLAGS) +@DEFS@ $(pkgcflags) @CFLAGS_DEBUG@ -nologo -c -W3 -YX -Fp$(TMP_DIR)\ -MDd @CFLAGS_OPTIMIZE@ -nologo -c -W3 -YX -Fp$(TMP_DIR)\ -MD @LDFLAGS_DEBUG@ -nologo -machine:$(MACHINE) -debug -debugtype:cv @LDFLAGS_OPTIMIZE@ -nologo -machine:$(MACHINE) -release -opt:ref -opt:icf,3 @TCL_DBGX@ $(SUFX) @TCL_LIB_FILE@ $(PROJECT)$(VERSION)$(SUFX).lib @TCL_NEEDS_EXP_FILE@ -@LIBS@ $(baselibs) +@LIBS@ $(baselibs) $(PRJ_LIBS) @prefix@ $(_INSTALLDIR) @exec_prefix@ $(BIN_INSTALL_DIR) @SHLIB_CFLAGS@ @STLIB_CFLAGS@ @CFLAGS_WARNING@ -W3 @EXTRA_CFLAGS@ -YX @SHLIB_LD@ $(link32) $(dlllflags) @STLIB_LD@ $(lib32) -nologo -@SHLIB_LD_LIBS@ $(baselibs) +@SHLIB_LD_LIBS@ $(baselibs) $(PRJ_LIBS) @SHLIB_SUFFIX@ .dll @DL_LIBS@ @LDFLAGS@ @TCL_CC_SEARCH_FLAGS@ @TCL_LD_SEARCH_FLAGS@ @@ -930,32 +661,32 @@ #--------------------------------------------------------------------- # Special case object file targets #--------------------------------------------------------------------- $(TMP_DIR)\testMain.obj: $(WINDIR)\tclAppInit.c - $(cc32) $(TCL_CFLAGS) -DTCL_TEST \ + $(cc32) $(appcflags) -DTCL_TEST \ -DTCL_USE_STATIC_PACKAGES=$(TCL_USE_STATIC_PACKAGES) \ -Fo$@ $? $(TMP_DIR)\tclMain2.obj: $(GENERICDIR)\tclMain.c - $(cc32) $(TCL_CFLAGS) -DBUILD_tcl -DTCL_ASCII_MAIN \ + $(cc32) $(pkgcflags) -DTCL_ASCII_MAIN \ -Fo$@ $? $(TMP_DIR)\tclTest.obj: $(GENERICDIR)\tclTest.c - $(cc32) $(TCL_CFLAGS) -Fo$@ $? + $(cc32) $(appcflags) -Fo$@ $? $(TMP_DIR)\tclTestObj.obj: $(GENERICDIR)\tclTestObj.c - $(cc32) $(TCL_CFLAGS) -Fo$@ $? + $(cc32) $(appcflags) -Fo$@ $? $(TMP_DIR)\tclWinTest.obj: $(WINDIR)\tclWinTest.c - $(cc32) $(TCL_CFLAGS) -Fo$@ $? + $(CCAPPCMD) $? $(TMP_DIR)\tclZlib.obj: $(GENERICDIR)\tclZlib.c - $(cc32) $(TCL_CFLAGS) -I$(COMPATDIR)\zlib -DBUILD_tcl -Fo$@ $? + $(cc32) $(pkgcflags) -I$(COMPATDIR)\zlib -Fo$@ $? $(TMP_DIR)\tclPkgConfig.obj: $(GENERICDIR)\tclPkgConfig.c - $(cc32) -DBUILD_tcl $(TCL_CFLAGS) \ + $(cc32) $(pkgcflags) \ -DCFG_INSTALL_LIBDIR="\"$(LIB_INSTALL_DIR:\=\\)\"" \ -DCFG_INSTALL_BINDIR="\"$(BIN_INSTALL_DIR:\=\\)\"" \ -DCFG_INSTALL_SCRDIR="\"$(SCRIPT_INSTALL_DIR:\=\\)\"" \ -DCFG_INSTALL_INCDIR="\"$(INCLUDE_INSTALL_DIR:\=\\)\"" \ -DCFG_INSTALL_DOCDIR="\"$(DOC_INSTALL_DIR:\=\\)\"" \ @@ -965,45 +696,45 @@ -DCFG_RUNTIME_INCDIR="\"$(INCLUDE_INSTALL_DIR:\=\\)\"" \ -DCFG_RUNTIME_DOCDIR="\"$(DOC_INSTALL_DIR:\=\\)\"" \ -Fo$@ $? $(TMP_DIR)\tclAppInit.obj: $(WINDIR)\tclAppInit.c - $(cc32) $(TCL_CFLAGS) \ + $(cc32) $(appcflags) \ -DTCL_USE_STATIC_PACKAGES=$(TCL_USE_STATIC_PACKAGES) \ -Fo$@ $? ### The following objects should be built using the stub interfaces ### *ALL* extensions need to built with -DTCL_THREADS=1 $(TMP_DIR)\tclWinReg.obj: $(WINDIR)\tclWinReg.c !if $(STATIC_BUILD) - $(cc32) $(TCL_CFLAGS) -DTCL_THREADS=1 -DSTATIC_BUILD -Fo$@ $? + $(cc32) $(appcflags) -DSTATIC_BUILD -Fo$@ $? !else - $(cc32) $(TCL_CFLAGS) -DTCL_THREADS=1 -DUSE_TCL_STUBS -Fo$@ $? + $(cc32) $(appcflags) -DUSE_TCL_STUBS -Fo$@ $? !endif $(TMP_DIR)\tclWinDde.obj: $(WINDIR)\tclWinDde.c !if $(STATIC_BUILD) - $(cc32) $(TCL_CFLAGS) -DTCL_THREADS=1 -DSTATIC_BUILD -Fo$@ $? + $(cc32) $(appcflags) -DSTATIC_BUILD -Fo$@ $? !else - $(cc32) $(TCL_CFLAGS) -DTCL_THREADS=1 -DUSE_TCL_STUBS -Fo$@ $? + $(cc32) $(appcflags) -DUSE_TCL_STUBS -Fo$@ $? !endif ### The following objects are part of the stub library and should not ### be built as DLL objects. -Zl is used to avoid a dependency on any ### specific C run-time. $(TMP_DIR)\tclStubLib.obj: $(GENERICDIR)\tclStubLib.c - $(cc32) $(STUB_CFLAGS) -Zl -DSTATIC_BUILD $(TCL_INCLUDES) -Fo$@ $? + $(cc32) $(stubscflags) -Fo$@ $? $(TMP_DIR)\tclTomMathStubLib.obj: $(GENERICDIR)\tclTomMathStubLib.c - $(cc32) $(STUB_CFLAGS) -Zl -DSTATIC_BUILD $(TCL_INCLUDES) -Fo$@ $? + $(cc32) $(stubscflags) -Fo$@ $? $(TMP_DIR)\tclOOStubLib.obj: $(GENERICDIR)\tclOOStubLib.c - $(cc32) $(STUB_CFLAGS) -Zl -DSTATIC_BUILD $(TCL_INCLUDES) -Fo$@ $? + $(cc32) $(stubscflags) -Fo$@ $? $(TMP_DIR)\tclsh.exe.manifest: $(WINDIR)\tclsh.exe.manifest.in @nmakehlp -s << $** >$@ @MACHINE@ $(MACHINE:IX86=X86) @TCL_WIN_VERSION@ $(DOTVERSION).0.0 @@ -1020,11 +751,11 @@ depend: !if !exist($(TCLSH)) @echo Build tclsh first! !else $(TCLSH) $(TOOLSDIR:\=/)/mkdepend.tcl -vc32 -out:"$(OUT_DIR)\depend.mk" \ - -passthru:"-DBUILD_tcl $(TCL_INCLUDES)" $(GENERICDIR),$$(GENERICDIR) \ + -passthru:"-DBUILD_tcl $(TCL_INCLUDES) $(PRJ_INCLUDES)" $(GENERICDIR),$$(GENERICDIR) \ $(COMPATDIR),$$(COMPATDIR) $(TOMMATHDIR),$$(TOMMATHDIR) $(WINDIR),$$(WINDIR) @<< $(TCLOBJS) << !endif @@ -1042,51 +773,27 @@ ### add a spacer in the output !message #--------------------------------------------------------------------- -# Implicit rules. A limitation exists with nmake that requires that +# Implicit rules that are not covered by the common ones defined in +# rules.vc. A limitation exists with nmake that requires that # source directory can not contain spaces in the path. This an # absolute. #--------------------------------------------------------------------- -{$(WINDIR)}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<< -$< -<< - {$(TOMMATHDIR)}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<< -$< -<< - -{$(GENERICDIR)}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<< -$< -<< - -{$(COMPATDIR)}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<< + $(cc32) $(pkgcflags) -Fo$(TMP_DIR)\ @<< $< << {$(COMPATDIR)\zlib}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<< + $(cc32) $(pkgcflags) -Fo$(TMP_DIR)\ @<< $< << -{$(WINDIR)}.rc{$(TMP_DIR)}.res: - $(rc32) -fo $@ -r -i "$(GENERICDIR)" -i "$(TMP_DIR)" \ - -d DEBUG=$(DEBUG) -d UNCHECKED=$(UNCHECKED) \ - -d TCL_THREADS=$(TCL_THREADS) \ - -d STATIC_BUILD=$(STATIC_BUILD) \ - $< - -$(TMP_DIR)\tclsh.res: $(TMP_DIR)\tclsh.exe.manifest - -.SUFFIXES: -.SUFFIXES:.c .rc +$(TMP_DIR)\tclsh.res: $(TMP_DIR)\tclsh.exe.manifest $(WINDIR)\tclsh.rc #--------------------------------------------------------------------- # Installation. #--------------------------------------------------------------------- @@ -1103,25 +810,25 @@ @$(CPY) "$(TCLSH)" "$(BIN_INSTALL_DIR)\" !endif @echo Installing $(TCLSTUBLIBNAME) @$(CPY) "$(TCLSTUBLIB)" "$(LIB_INSTALL_DIR)\" -#" emacs fix - -install-libraries: tclConfig install-msgs install-tzdata - @if not exist "$(SCRIPT_INSTALL_DIR)$(NULL)" \ +install-libraries: tclConfig tcl-nmake install-msgs install-tzdata + @if not exist "$(SCRIPT_INSTALL_DIR)" \ $(MKDIR) "$(SCRIPT_INSTALL_DIR)" - @if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8$(NULL)" \ + @if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8" \ $(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8" - @if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4$(NULL)" \ + @if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4" \ $(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4" - @if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\platform$(NULL)" \ + @if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\platform" \ $(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\platform" - @if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5$(NULL)" \ + @if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5" \ $(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5" - @if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.6$(NULL)" \ + @if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.6" \ $(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.6" + @if not exist "$(LIB_INSTALL_DIR)\nmake" \ + $(MKDIR) "$(LIB_INSTALL_DIR)\nmake" @echo Installing header files @$(CPY) "$(GENERICDIR)\tcl.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(GENERICDIR)\tclDecls.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(GENERICDIR)\tclOO.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(GENERICDIR)\tclOODecls.h" "$(INCLUDE_INSTALL_DIR)\" @@ -1141,10 +848,14 @@ @$(CPY) "$(ROOT)\library\package.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\word.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\auto.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(OUT_DIR)\tclConfig.sh" "$(LIB_INSTALL_DIR)\" @$(CPY) "$(WINDIR)\tclooConfig.sh" "$(LIB_INSTALL_DIR)\" + @$(CPY) "$(WINDIR)\rules.vc" "$(LIB_INSTALL_DIR)\nmake\" + @$(CPY) "$(WINDIR)\targets.vc" "$(LIB_INSTALL_DIR)\nmake\" + @$(CPY) "$(WINDIR)\nmakehlp.c" "$(LIB_INSTALL_DIR)\nmake\" + @$(CPY) "$(OUT_DIR)\tcl.nmake" "$(LIB_INSTALL_DIR)\nmake\" @echo Installing library http1.0 directory @$(CPY) "$(ROOT)\library\http1.0\*.tcl" \ "$(SCRIPT_INSTALL_DIR)\http1.0\" @echo Installing library opt0.4 directory @$(CPY) "$(ROOT)\library\opt\*.tcl" \ @@ -1185,12 +896,11 @@ "$(LIB_INSTALL_DIR)\reg$(REGDOTVERSION)\" !endif @echo Installing encodings @$(CPY) "$(ROOT)\library\encoding\*.enc" \ "$(SCRIPT_INSTALL_DIR)\encoding\" - -#" emacs fix +# "emacs font-lock highlighting fix install-tzdata: @echo Installing time zone data @set TCL_LIBRARY=$(ROOT:\=/)/library @$(TCLSH_NATIVE) "$(ROOT:\=/)/tools/installData.tcl" \ @@ -1220,32 +930,12 @@ @echo Removing $(TCLDDELIB) ... @if exist $(TCLDDELIB) del $(TCLDDELIB) @echo Removing $(TCLREGLIB) ... @if exist $(TCLREGLIB) del $(TCLREGLIB) -clean: clean-pkgs - @echo Cleaning $(TMP_DIR)\* ... - @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR) - @echo Cleaning $(WINDIR)\nmakehlp.obj ... - @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj - @echo Cleaning $(WINDIR)\nmakehlp.exe ... - @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe - @echo Cleaning $(WINDIR)\nmhlp-out.txt ... - @if exist $(WINDIR)\nmhlp-out.txt del $(WINDIR)\nmhlp-out.txt - @echo Cleaning $(WINDIR)\_junk.pch ... - @if exist $(WINDIR)\_junk.pch del $(WINDIR)\_junk.pch - @echo Cleaning $(WINDIR)\vercl.x ... - @if exist $(WINDIR)\vercl.x del $(WINDIR)\vercl.x - @echo Cleaning $(WINDIR)\vercl.i ... - @if exist $(WINDIR)\vercl.i del $(WINDIR)\vercl.i - @echo Cleaning $(WINDIR)\versions.vc ... - @if exist $(WINDIR)\versions.vc del $(WINDIR)\versions.vc - +clean: default-clean clean-pkgs +hose: default-hose realclean: hose -hose: - @echo Hosing $(OUT_DIR)\* ... - @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR) - # Local Variables: # mode: makefile # End: ADDED win/rules-ext.vc Index: win/rules-ext.vc ================================================================== --- /dev/null +++ win/rules-ext.vc @@ -0,0 +1,109 @@ +# This file should only be included in makefiles for Tcl extensions, +# NOT in the makefile for Tcl itself. + +!ifndef _RULES_EXT_VC + +# We need to run from the directory the parent makefile is located in. +# nmake does not tell us what makefile was used to invoke it so parent +# makefile has to set the MAKEFILEVC macro or we just make a guess and +# warn if we think that is not the case. +!if "$(MAKEFILEVC)" == "" + +!if exist("$(PROJECT).vc") +MAKEFILEVC = $(PROJECT).vc +!elseif exist("makefile.vc") +MAKEFILEVC = makefile.vc +!endif +!endif # "$(MAKEFILEVC)" == "" + +!if !exist("$(MAKEFILEVC)") +MSG = ^ +You must run nmake from the directory containing the project makefile.^ +If you are doing that and getting this message, set the MAKEFILEVC^ +macro to the name of the project makefile. +!message WARNING: $(MSG) +!endif + +!if "$(PROJECT)" == "tcl" +!error The rules-ext.vc file is not intended for Tcl itself. +!endif + +# First locate the Tcl directory that we are working with. +!ifdef TCLDIR + +_RULESDIR = $(TCLDIR:/=\) + +!else + +# If an installation path is specified, that is also the Tcl directory. +# Also, tk never builds against an installed Tcl, it needs Tcl sources +!if defined(INSTALLDIR) && "$(PROJECT)" != "tk" +_RULESDIR=$(INSTALLDIR:/=\) +!else +_RULESDIR = ..\..\tcl +!endif + +!endif # ifndef TCLDIR + +# Now look for the targets.vc file under the Tcl root. Note we check this +# file and not rules.vc because the latter also exists on older systems. +!if exist("$(_RULESDIR)\lib\nmake\targets.vc") # Building against installed Tcl +_RULESDIR = $(_RULESDIR)\lib\nmake +!elseif exist("$(_RULESDIR)\win\targets.vc") # Building against Tcl sources +_RULESDIR = $(_RULESDIR)\win +!else +# If we have not located Tcl's targets file, most likely we are compiling +# against an older version of Tcl and so must use our own support files. +_RULESDIR = . +!endif + +!if "$(_RULESDIR)" != "." +# Potentially using Tcl's support files. If this extension has its own +# nmake support files, need to compare the versions and pick newer. + +!if exist("rules.vc") # The extension has its own copy + +# We extract version numbers using the nmakehlp program. +!if [$(CC) -nologo "$(_RULESDIR)\nmakehlp.c" -link -subsystem:console > nul] +!endif + +!if [echo TCL_RULES_MAJOR = \> versions.vc] \ + && [nmakehlp -V "$(_RULESDIR)\rules.vc" RULES_VERSION_MAJOR >> versions.vc] +!endif +!if [echo TCL_RULES_MINOR = \>> versions.vc] \ + && [nmakehlp -V "$(_RULESDIR)\rules.vc" RULES_VERSION_MINOR >> versions.vc] +!endif + +!if [echo OUR_RULES_MAJOR = \>> versions.vc] \ + && [nmakehlp -V "rules.vc" RULES_VERSION_MAJOR >> versions.vc] +!endif +!if [echo OUR_RULES_MINOR = \>> versions.vc] \ + && [nmakehlp -V "rules.vc" RULES_VERSION_MINOR >> versions.vc] +!endif +!include versions.vc +# We have a newer version of the support files, use them +!if ($(TCL_RULES_MAJOR) != $(OUR_RULES_MAJOR)) || ($(TCL_RULES_MINOR) < $(OUR_RULES_MINOR)) +_RULESDIR = . +!endif + +!endif # if exist("rules.vc") + +!endif # if $(_RULESDIR) != "." + +# Let rules.vc know what copy of nmakehlp.c to use. +NMAKEHLPC = $(_RULESDIR)\nmakehlp.c + +# Get rid of our internal defines before calling rules.vc +!undef TCL_RULES_MAJOR +!undef TCL_RULES_MINOR +!undef OUR_RULES_MAJOR +!undef OUR_RULES_MINOR + +!if exist("$(_RULESDIR)\rules.vc") +!message *** Using $(_RULESDIR)\rules.vc +!include "$(_RULESDIR)\rules.vc" +!else +!error *** Could not locate rules.vc in $(_RULESDIR) +!endif + +!endif # _RULES_EXT_VC Index: win/rules.vc ================================================================== --- win/rules.vc +++ win/rules.vc @@ -1,62 +1,408 @@ -#------------------------------------------------------------------------------ +#------------------------------------------------------------- -*- makefile -*- # rules.vc -- # -# Microsoft Visual C++ makefile include for decoding the commandline -# macros. This file does not need editing to build Tcl. +# Part of the nmake based build system for Tcl and its extensions. +# This file does all the hard work in terms of parsing build options, +# compiler switches, defining common targets and macros. The Tcl makefile +# directly includes this. Extensions include it via "rules-ext.vc". +# +# See TIP 477 (https://core.tcl.tk/tips/doc/trunk/tip/477.md) for +# detailed documentation. # # See the file "license.terms" for information on usage and redistribution # of this file, and for a DISCLAIMER OF ALL WARRANTIES. # # Copyright (c) 2001-2003 David Gravereaux. # Copyright (c) 2003-2008 Patrick Thoyts +# Copyright (c) 2017 Ashok P. Nadkarni #------------------------------------------------------------------------------ !ifndef _RULES_VC _RULES_VC = 1 -cc32 = $(CC) # built-in default. -link32 = link -lib32 = lib -rc32 = $(RC) # built-in default. - -!ifndef INSTALLDIR -### Assume the normal default. -_INSTALLDIR = C:\Program Files\Tcl +# The following macros define the version of the rules.vc nmake build system +# For modifications that are not backward-compatible, you *must* change +# the major version. +RULES_VERSION_MAJOR = 1 +RULES_VERSION_MINOR = 0 + +# The PROJECT macro must be defined by parent makefile. +!if "$(PROJECT)" == "" +!error *** Error: Macro PROJECT not defined! Please define it before including rules.vc +!endif + +!if "$(PRJ_PACKAGE_TCLNAME)" == "" +PRJ_PACKAGE_TCLNAME = $(PROJECT) +!endif + +# Also special case Tcl and Tk to save some typing later +DOING_TCL = 0 +DOING_TK = 0 +!if "$(PROJECT)" == "tcl" +DOING_TCL = 1 +!elseif "$(PROJECT)" == "tk" +DOING_TK = 1 +!endif + +!ifndef NEED_TK +# Backwards compatibility +!ifdef PROJECT_REQUIRES_TK +NEED_TK = $(PROJECT_REQUIRES_TK) +!else +NEED_TK = 0 +!endif +!endif + +!ifndef NEED_TCL_SOURCE +NEED_TCL_SOURCE = 0 +!endif + +!ifdef NEED_TK_SOURCE +!if $(NEED_TK_SOURCE) +NEED_TK = 1 +!endif !else -### Fix the path separators. -_INSTALLDIR = $(INSTALLDIR:/=\) +NEED_TK_SOURCE = 0 !endif + +################################################################ +# Nmake is a pretty weak environment in syntax and capabilities +# so this file is necessarily verbose. It's broken down into +# the following parts. +# +# 0. Sanity check that compiler environment is set up and initialize +# any built-in settings from the parent makefile +# 1. First define the external tools used for compiling, copying etc. +# as this is independent of everything else. +# 2. Figure out our build structure in terms of the directory, whether +# we are building Tcl or an extension, etc. +# 3. Determine the compiler and linker versions +# 4. Build the nmakehlp helper application +# 5. Determine the supported compiler options and features +# 6. Parse the OPTS macro value for user-specified build configuration +# 7. Parse the STATS macro value for statistics instrumentation +# 8. Parse the CHECKS macro for additional compilation checks +# 9. Extract Tcl, and possibly Tk, version numbers from the headers +# 10. Based on this selected configuration, construct the output +# directory and file paths +# 11. Construct the paths where the package is to be installed +# 12. Set up the actual options passed to compiler and linker based +# on the information gathered above. +# 13. Define some standard build targets and implicit rules. These may +# be optionally disabled by the parent makefile. +# 14. (For extensions only.) Compare the configuration of the target +# Tcl and the extensions and warn against discrepancies. +# +# One final note about the macro names used. They are as they are +# for historical reasons. We would like legacy extensions to +# continue to work with this make include file so be wary of +# changing them for consistency or clarity. + +# 0. Sanity check compiler environment + +# Check to see we are configured to build with MSVC (MSDEVDIR, MSVCDIR or +# VCINSTALLDIR) or with the MS Platform SDK (MSSDK or WindowsSDKDir) + +!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR) +MSG = ^ +Visual C++ compiler environment not initialized. +!error $(MSG) +!endif + +# We need to run from the directory the parent makefile is located in. +# nmake does not tell us what makefile was used to invoke it so parent +# makefile has to set the MAKEFILEVC macro or we just make a guess and +# warn if we think that is not the case. +!if "$(MAKEFILEVC)" == "" + +!if exist("$(PROJECT).vc") +MAKEFILEVC = $(PROJECT).vc +!elseif exist("makefile.vc") +MAKEFILEVC = makefile.vc +!endif +!endif # "$(MAKEFILEVC)" == "" + +!if !exist("$(MAKEFILEVC)") +MSG = ^ +You must run nmake from the directory containing the project makefile.^ +If you are doing that and getting this message, set the MAKEFILEVC^ +macro to the name of the project makefile. +!message WARNING: $(MSG) +!endif + + +################################################################ +# 1. Define external programs being used #---------------------------------------------------------- # Set the proper copy method to avoid overwrite questions # to the user when copying files and selecting the right # "delete all" method. #---------------------------------------------------------- -!if "$(OS)" == "Windows_NT" RMDIR = rmdir /S /Q -ERRNULL = 2>NUL -!if ![ver | find "4.0" > nul] -CPY = echo y | xcopy /i >NUL -COPY = copy >NUL -!else CPY = xcopy /i /y >NUL +CPYDIR = xcopy /e /i /y >NUL COPY = copy /y >NUL -!endif -!else # "$(OS)" != "Windows_NT" -CPY = xcopy /i >_JUNK.OUT # On Win98 NUL does not work here. -COPY = copy >_JUNK.OUT # On Win98 NUL does not work here. -RMDIR = deltree /Y -NULL = \NUL # Used in testing directory existence -ERRNULL = >NUL # Win9x shell cannot redirect stderr -!endif MKDIR = mkdir -#------------------------------------------------------------------------------ -# Determine the host and target architectures and compiler version. -#------------------------------------------------------------------------------ +###################################################################### +# 2. Figure out our build environment in terms of what we're building. +# +# (a) Tcl itself +# (b) Tk +# (c) a Tcl extension using libraries/includes from an *installed* Tcl +# (d) a Tcl extension using libraries/includes from Tcl source directory +# +# This last is needed because some extensions still need +# some Tcl interfaces that are not publicly exposed. +# +# The fragment will set the following macros: +# ROOT - root of this module sources +# COMPATDIR - source directory that holds compatibility sources +# DOCDIR - source directory containing documentation files +# GENERICDIR - platform-independent source directory +# WINDIR - Windows-specific source directory +# TESTDIR - directory containing test files +# TOOLSDIR - directory containing build tools +# _TCLDIR - root of the Tcl installation OR the Tcl sources. Not set +# when building Tcl itself. +# _INSTALLDIR - native form of the installation path. For Tcl +# this will be the root of the Tcl installation. For extensions +# this will be the lib directory under the root. +# TCLINSTALL - set to 1 if _TCLDIR refers to +# headers and libraries from an installed Tcl, and 0 if built against +# Tcl sources. Not set when building Tcl itself. Yes, not very well +# named. +# _TCL_H - native path to the tcl.h file +# +# If Tk is involved, also sets the following +# _TKDIR - native form Tk installation OR Tk source. Not set if building +# Tk itself. +# TKINSTALL - set 1 if _TKDIR refers to installed Tk and 0 if Tk sources +# _TK_H - native path to the tk.h file + +# Root directory for sources and assumed subdirectories +ROOT = $(MAKEDIR)\.. +# The following paths CANNOT have spaces in them as they appear on the +# left side of implicit rules. +!ifndef COMPATDIR +COMPATDIR = $(ROOT)\compat +!endif +!ifndef DOCDIR +DOCDIR = $(ROOT)\doc +!endif +!ifndef GENERICDIR +GENERICDIR = $(ROOT)\generic +!endif +!ifndef TOOLSDIR +TOOLSDIR = $(ROOT)\tools +!endif +!ifndef TESTDIR +TESTDIR = $(ROOT)\tests +!endif +!ifndef LIBDIR +!if exist("$(ROOT)\library") +LIBDIR = $(ROOT)\library +!else +LIBDIR = $(ROOT)\lib +!endif +!endif +!ifndef DEMODIR +!if exist("$(LIBDIR)\demos") +DEMODIR = $(LIBDIR)\demos +!else +DEMODIR = $(ROOT)\demos +!endif +!endif # ifndef DEMODIR +# Do NOT enclose WINDIR in a !ifndef because Windows always defines +# WINDIR env var to point to c:\windows! +# TBD - This is a potentially dangerous conflict, rename WINDIR to +# something else +WINDIR = $(ROOT)\win + +!ifndef RCDIR +!if exist("$(WINDIR)\rc") +RCDIR = $(WINDIR)\rc +!else +RCDIR = $(WINDIR) +!endif +!endif +RCDIR = $(RCDIR:/=\) + +# The target directory where the built packages and binaries will be installed. +# INSTALLDIR is the (optional) path specified by the user. +# _INSTALLDIR is INSTALLDIR using the backslash separator syntax +!ifdef INSTALLDIR +### Fix the path separators. +_INSTALLDIR = $(INSTALLDIR:/=\) +!else +### Assume the normal default. +_INSTALLDIR = $(HOMEDRIVE)\Tcl +!endif + +!if $(DOING_TCL) + +# BEGIN Case 2(a) - Building Tcl itself + +# Only need to define _TCL_H +_TCL_H = ..\generic\tcl.h + +# END Case 2(a) - Building Tcl itself + +!elseif $(DOING_TK) + +# BEGIN Case 2(b) - Building Tk + +TCLINSTALL = 0 # Tk always builds against Tcl source, not an installed Tcl +!if "$(TCLDIR)" == "" +TCLDIR = ../../tcl +!endif +_TCLDIR = $(TCLDIR:/=\) +_TCL_H = $(_TCLDIR)\generic\tcl.h +!if !exist("$(_TCL_H)") +!error Could not locate tcl.h. Please set the TCLDIR macro to point to the Tcl *source* directory. +!endif + +_TK_H = ..\generic\tk.h + +# END Case 2(b) - Building Tk + +!else + +# BEGIN Case 2(c) or (d) - Building an extension other than Tk + +# If command line has specified Tcl location through TCLDIR, use it +# else default to the INSTALLDIR setting +!if "$(TCLDIR)" != "" + +_TCLDIR = $(TCLDIR:/=\) +!if exist("$(_TCLDIR)\include\tcl.h") # Case 2(c) with TCLDIR defined +TCLINSTALL = 1 +_TCL_H = $(_TCLDIR)\include\tcl.h +!elseif exist("$(_TCLDIR)\generic\tcl.h") # Case 2(d) with TCLDIR defined +TCLINSTALL = 0 +_TCL_H = $(_TCLDIR)\generic\tcl.h +!endif + +!else # TCLDIR is not defined + +!if exist("$(_INSTALLDIR)\include\tcl.h") # Case 2(c) for extensions with TCLDIR undefined +TCLINSTALL = 1 +TCLDIR = $(_INSTALLDIR)\.. +# NOTE: we will be resetting _INSTALLDIR to _INSTALLDIR/lib for extensions +# later so the \.. accounts for the /lib +_TCLDIR = $(_INSTALLDIR)\.. +_TCL_H = $(_TCLDIR)\include\tcl.h +!elseif exist("..\..\tcl\generic\tcl.h") +TCLINSTALL = 0 +TCLDIR = ..\..\tcl +_TCLDIR = $(TCLDIR) +_TCL_H = $(_TCLDIR)\generic\tcl.h +!endif + +!endif # TCLDIR + +!ifndef _TCL_H +MSG =^ +Failed to find tcl.h. The TCLDIR macro is set incorrectly or is not set and default path does not contain tcl.h. +!error $(MSG) +!endif + +# Now do the same to locate Tk headers and libs if project requires Tk +!if $(NEED_TK) + +!if "$(TKDIR)" != "" + +_TKDIR = $(TKDIR:/=\) +!if exist("$(_TKDIR)\include\tk.h") +TKINSTALL = 1 +_TK_H = $(_TKDIR)\include\tk.h +!elseif exist("$(_TKDIR)\generic\tk.h") +TKINSTALL = 0 +_TK_H = $(_TKDIR)\generic\tk.h +!endif + +!else # TKDIR not defined + +!if exist("$(_INSTALLDIR)\..\include\tk.h") +TKINSTALL = 1 +_TKDIR = $(_INSTALLDIR)\.. +_TK_H = $(_TKDIR)\include\tk.h +TKDIR = $(_TKDIR) +!elseif exist("$(_TCLDIR)\include\tk.h") +TKINSTALL = 1 +_TKDIR = $(_TCLDIR) +_TK_H = $(_TKDIR)\include\tk.h +TKDIR = $(_TKDIR) +!endif + +!endif # TKDIR + +!ifndef _TK_H +MSG =^ +Failed to find tk.h. The TKDIR macro is set incorrectly or is not set and default path does not contain tk.h. +!error $(MSG) +!endif + +!endif # NEED_TK + +!if $(NEED_TCL_SOURCE) && $(TCLINSTALL) +MSG = ^ +*** Warning: This extension requires the source distribution of Tcl.^ +*** Please set the TCLDIR macro to point to the Tcl sources. +!error $(MSG) +!endif + +!if $(NEED_TK_SOURCE) +!if $(TKINSTALL) +MSG = ^ +*** Warning: This extension requires the source distribution of Tk.^ +*** Please set the TKDIR macro to point to the Tk sources. +!error $(MSG) +!endif +!endif + + +# If INSTALLDIR set to tcl installation root dir then reset to the +# lib dir for installing extensions +!if exist("$(_INSTALLDIR)\include\tcl.h") +_INSTALLDIR=$(_INSTALLDIR)\lib +!endif + +# END Case 2(c) or (d) - Building an extension +!endif # if $(DOING_TCL) + +################################################################ +# 3. Determine compiler version and architecture +# In this section, we figure out the compiler version and the +# architecture for which we are building. This sets the +# following macros: +# VCVERSION - the internal compiler version as 1200, 1400, 1910 etc. +# This is also printed by the compiler in dotted form 19.10 etc. +# VCVER - the "marketing version", for example Visual C++ 6 for internal +# compiler version 1200. This is kept only for legacy reasons as it +# does not make sense for recent Microsoft compilers. Only used for +# output directory names. +# ARCH - set to IX86 or AMD64 depending on 32- or 64-bit target +# NATIVE_ARCH - set to IX86 or AMD64 for the host machine +# MACHINE - same as $(ARCH) - legacy +# _VC_MANIFEST_EMBED_{DLL,EXE} - commands for embedding a manifest if needed +# CFG_ENCODING - set to an character encoding. +# TBD - this is passed to compiler as TCL_CFGVAL_ENCODING but can't +# see where it is used + +cc32 = $(CC) # built-in default. +link32 = link +lib32 = lib +rc32 = $(RC) # built-in default. + +#---------------------------------------------------------------- +# Figure out the compiler architecture and version by writing +# the C macros to a file, preprocessing them with the C +# preprocessor and reading back the created file _HASH=^# _VC_MANIFEST_EMBED_EXE= _VC_MANIFEST_EMBED_DLL= VCVER=0 @@ -64,20 +410,47 @@ && ![echo $(_HASH)if defined(_M_IX86) >> vercl.x] \ && ![echo ARCH=IX86 >> vercl.x] \ && ![echo $(_HASH)elif defined(_M_AMD64) >> vercl.x] \ && ![echo ARCH=AMD64 >> vercl.x] \ && ![echo $(_HASH)endif >> vercl.x] \ - && ![cl -nologo -TC -P vercl.x $(ERRNULL)] + && ![$(cc32) -nologo -TC -P vercl.x 2>NUL] !include vercl.i +!if $(VCVERSION) < 1900 !if ![echo VCVER= ^\> vercl.vc] \ && ![set /a $(VCVERSION) / 100 - 6 >> vercl.vc] !include vercl.vc !endif +!else +# The simple calculation above does not apply to new Visual Studio releases +# Keep the compiler version in its native form. +VCVER = $(VCVERSION) !endif -!if ![del $(ERRNUL) /q/f vercl.x vercl.i vercl.vc] !endif +!if ![del 2>NUL /q/f vercl.x vercl.i vercl.vc] +!endif + +#---------------------------------------------------------------- +# The MACHINE macro is used by legacy makefiles so set it as well +!ifdef MACHINE +!if "$(MACHINE)" == "x86" +!undef MACHINE +MACHINE = IX86 +!elseif "$(MACHINE)" == "x64" +!undef MACHINE +MACHINE = AMD64 +!endif +!if "$(MACHINE)" != "$(ARCH)" +!error Specified MACHINE macro $(MACHINE) does not match detected target architecture $(ARCH). +!endif +!else +MACHINE=$(ARCH) +!endif + +#------------------------------------------------------------ +# Figure out the *host* architecture by reading the registry + !if ![reg query HKLM\Hardware\Description\System\CentralProcessor\0 /v Identifier | findstr /i x86] NATIVE_ARCH=IX86 !else NATIVE_ARCH=AMD64 !endif @@ -86,157 +459,229 @@ !if $(VCVERSION) >= 1400 _VC_MANIFEST_EMBED_EXE=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 _VC_MANIFEST_EMBED_DLL=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 !endif -!ifndef MACHINE -MACHINE=$(ARCH) -!endif - !ifndef CFG_ENCODING CFG_ENCODING = \"cp1252\" !endif -!message =============================================================================== - -#---------------------------------------------------------- -# build the helper app we need to overcome nmake's limiting -# environment. -#---------------------------------------------------------- - -!if !exist(nmakehlp.exe) -!if [$(cc32) -nologo nmakehlp.c -link -subsystem:console > nul] -!endif -!endif - -#---------------------------------------------------------- -# Test for compiler features -#---------------------------------------------------------- - -### test for optimizations -!if [nmakehlp -c -Ot] -!message *** Compiler has 'Optimizations' -OPTIMIZING = 1 -!else -!message *** Compiler does not have 'Optimizations' -OPTIMIZING = 0 -!endif - -OPTIMIZATIONS = - -!if [nmakehlp -c -Ot] -OPTIMIZATIONS = $(OPTIMIZATIONS) -Ot -!endif - -!if [nmakehlp -c -Oi] -OPTIMIZATIONS = $(OPTIMIZATIONS) -Oi -!endif - +################################################################ +# 4. Build the nmakehlp program +# This is a helper app we need to overcome nmake's limiting +# environment. We will call out to it to get various bits of +# information about supported compiler options etc. +# +# Tcl itself will always use the nmakehlp.c program which is +# in its own source. This is the "master" copy and kept updated. +# +# Extensions built against an installed Tcl will use the installed +# copy of Tcl's nmakehlp.c if there is one and their own version +# otherwise. In the latter case, they would also be using their own +# rules.vc. Note that older versions of Tcl do not install nmakehlp.c +# or rules.vc. +# +# Extensions built against Tcl sources will use the one from the Tcl source. +# +# When building an extension using a sufficiently new version of Tcl, +# rules-ext.vc will define NMAKEHLPC appropriately to point to the +# copy of nmakehlp.c to be used. + +!ifndef NMAKEHLPC +# Default to the one in the current directory (the extension's own nmakehlp.c) +NMAKEHLPC = nmakehlp.c + +!if !$(DOING_TCL) +!if $(TCLINSTALL) +!if exist("$(_TCLDIR)\lib\nmake\nmakehlp.c") +NMAKEHLPC = $(_TCLDIR)\lib\nmake\nmakehlp.c +!endif +!else # ! $(TCLINSTALL) +!if exist("$(_TCLDIR)\win\nmakehlp.c") +NMAKEHLPC = $(_TCLDIR)\win\nmakehlp.c +!endif +!endif # $(TCLINSTALL) +!endif # !$(DOING_TCL) + +!endif # NMAKEHLPC + +# We always build nmakehlp even if it exists since we do not know +# what source it was built from. +!message *** Using $(NMAKEHLPC) +!if [$(cc32) -nologo "$(NMAKEHLPC)" -link -subsystem:console > nul] +!endif + +################################################################ +# 5. Test for compiler features +# Visual C++ compiler options have changed over the years. Check +# which options are supported by the compiler in use. +# +# The following macros are set: +# OPTIMIZATIONS - the compiler flags to be used for optimized builds +# DEBUGFLAGS - the compiler flags to be used for debug builds +# LINKERFLAGS - Flags passed to the linker +# +# Note that these are the compiler settings *available*, not those +# that will be *used*. The latter depends on the OPTS macro settings +# which we have not yet parsed. +# +# Also note that some of the flags in OPTIMIZATIONS are not really +# related to optimization. They are placed there only for legacy reasons +# as some extensions expect them to be included in that macro. + +# -Op improves float consistency. Note only needed for older compilers +# Newer compilers do not need or support this option. !if [nmakehlp -c -Op] -OPTIMIZATIONS = $(OPTIMIZATIONS) -Op +FPOPTS = -Op !endif +# Strict floating point semantics - present in newer compilers in lieu of -Op !if [nmakehlp -c -fp:strict] -OPTIMIZATIONS = $(OPTIMIZATIONS) -fp:strict -!endif - -!if [nmakehlp -c -Gs] -OPTIMIZATIONS = $(OPTIMIZATIONS) -Gs -!endif - -!if [nmakehlp -c -GS] -OPTIMIZATIONS = $(OPTIMIZATIONS) -GS -!endif - -!if [nmakehlp -c -GL] -OPTIMIZATIONS = $(OPTIMIZATIONS) -GL -!endif - -DEBUGFLAGS = - -!if [nmakehlp -c -RTC1] -DEBUGFLAGS = $(DEBUGFLAGS) -RTC1 -!elseif [nmakehlp -c -GZ] -DEBUGFLAGS = $(DEBUGFLAGS) -GZ -!endif - -COMPILERFLAGS =-W3 /DUNICODE /D_UNICODE /D_ATL_XP_TARGETING - -# In v13 -GL and -YX are incompatible. -!if [nmakehlp -c -YX] -!if ![nmakehlp -c -GL] -OPTIMIZATIONS = $(OPTIMIZATIONS) -YX -!endif +FPOPTS = $(FPOPTS) -fp:strict !endif !if "$(MACHINE)" == "IX86" ### test for pentium errata !if [nmakehlp -c -QI0f] !message *** Compiler has 'Pentium 0x0f fix' -COMPILERFLAGS = $(COMPILERFLAGS) -QI0f +FPOPTS = $(FPOPTS) -QI0f !else !message *** Compiler does not have 'Pentium 0x0f fix' !endif !endif -!if "$(MACHINE)" == "IA64" -### test for Itanium errata -!if [nmakehlp -c -QIA64_Bx] -!message *** Compiler has 'B-stepping errata workarounds' -COMPILERFLAGS = $(COMPILERFLAGS) -QIA64_Bx +### test for optimizations +# /O2 optimization includes /Og /Oi /Ot /Oy /Ob2 /Gs /GF /Gy as per +# documentation. Note we do NOT want /Gs as that inserts a _chkstk +# stack probe at *every* function entry, not just those with more than +# a page of stack allocation resulting in a performance hit. However, +# /O2 documentation is misleading as its stack probes are simply the +# default page size locals allocation probes and not what is implied +# by an explicit /Gs option. + +OPTIMIZATIONS = $(FPOPTS) + +!if [nmakehlp -c -O2] +!message *** Compiler has 'Optimizations' +OPTIMIZING = 1 +OPTIMIZATIONS = $(OPTIMIZATIONS) -O2 +!else +# Legacy, really. All modern compilers support this +!message *** Compiler does not have 'Optimizations' +OPTIMIZING = 0 +!endif + +# Checks for buffer overflows in local arrays +!if [nmakehlp -c -GS] +OPTIMIZATIONS = $(OPTIMIZATIONS) -GS +!endif + +# Link time optimization. Note that this option (potentially) makes +# generated libraries only usable by the specific VC++ version that +# created it. Requires /LTCG linker option +!if [nmakehlp -c -GL] +OPTIMIZATIONS = $(OPTIMIZATIONS) -GL +CC_GL_OPT_ENABLED = 1 !else -!message *** Compiler does not have 'B-stepping errata workarounds' +# In newer compilers -GL and -YX are incompatible. +!if [nmakehlp -c -YX] +OPTIMIZATIONS = $(OPTIMIZATIONS) -YX !endif +!endif # [nmakehlp -c -GL] + +DEBUGFLAGS = $(FPOPTS) + +# Run time error checks. Not available or valid in a release, non-debug build +# RTC is for modern compilers, -GZ is legacy +!if [nmakehlp -c -RTC1] +DEBUGFLAGS = $(DEBUGFLAGS) -RTC1 +!elseif [nmakehlp -c -GZ] +DEBUGFLAGS = $(DEBUGFLAGS) -GZ !endif -# Prevents "LNK1561: entry point must be defined" error compiling from VS-IDE: +#---------------------------------------------------------------- +# Linker flags + +# LINKER_TESTFLAGS are for internal use when we call nmakehlp to test +# if the linker supports a specific option. Without these flags link will +# return "LNK1561: entry point must be defined" error compiling from VS-IDE: +# They are not passed through to the actual application / extension +# link rules. !ifndef LINKER_TESTFLAGS -LINKER_TESTFLAGS = /DLL /NOENTRY /OUT:nmhlp-out.txt -!endif - -!if "$(MACHINE)" == "IX86" -### test for -align:4096, when align:512 will do. -!if [nmakehlp -l -opt:nowin98 $(LINKER_TESTFLAGS)] -!message *** Linker has 'Win98 alignment problem' -ALIGN98_HACK = 1 -!else -!message *** Linker does not have 'Win98 alignment problem' -ALIGN98_HACK = 0 -!endif -!else -ALIGN98_HACK = 0 +LINKER_TESTFLAGS = /DLL /NOENTRY /OUT:nmakehlp.out !endif LINKERFLAGS = +# If compiler has enabled link time optimization, linker must too with -ltcg +!ifdef CC_GL_OPT_ENABLED !if [nmakehlp -l -ltcg $(LINKER_TESTFLAGS)] -LINKERFLAGS =-ltcg +LINKERFLAGS = $(LINKERFLAGS) -ltcg +!endif !endif -#---------------------------------------------------------- -# Decode the options requested. -#---------------------------------------------------------- +######################################################################## +# 6. Parse the OPTS macro to work out the requested build configuration. +# Based on this, we will construct the actual switches to be passed to the +# compiler and linker using the macros defined in the previous section. +# The following macros are defined by this section based on OPTS +# STATIC_BUILD - 0 -> Tcl is to be built as a shared library +# 1 -> build as a static library and shell +# TCL_THREADS - legacy but always 1 on Windows since winsock requires it. +# DEBUG - 1 -> debug build, 0 -> release builds +# SYMBOLS - 1 -> generate PDB's, 0 -> no PDB's +# PROFILE - 1 -> generate profiling info, 0 -> no profiling +# PGO - 1 -> profile based optimization, 0 -> no +# MSVCRT - 1 -> link to dynamic C runtime even when building static Tcl build +# 0 -> link to static C runtime for static Tcl build. +# Does not impact shared Tcl builds (STATIC_BUILD == 0) +# TCL_USE_STATIC_PACKAGES - 1 -> statically link the registry and dde extensions +# in the Tcl shell. 0 -> keep them as shared libraries +# Does not impact shared Tcl builds. +# USE_THREAD_ALLOC - 1 -> Use a shared global free pool for allocation. +# 0 -> Use the non-thread allocator. +# UNCHECKED - 1 -> when doing a debug build with symbols, use the release +# C runtime, 0 -> use the debug C runtime. +# USE_STUBS - 1 -> compile to use stubs interfaces, 0 -> direct linking +# CONFIG_CHECK - 1 -> check current build configuration against Tcl +# configuration (ignored for Tcl itself) +# Further, LINKERFLAGS are modified based on above. -!if "$(OPTS)" == "" || [nmakehlp -f "$(OPTS)" "none"] +# Default values for all the above STATIC_BUILD = 0 TCL_THREADS = 1 DEBUG = 0 SYMBOLS = 0 PROFILE = 0 PGO = 0 MSVCRT = 1 -LOIMPACT = 0 TCL_USE_STATIC_PACKAGES = 0 USE_THREAD_ALLOC = 1 UNCHECKED = 0 +CONFIG_CHECK = 1 +!if $(DOING_TCL) +USE_STUBS = 0 !else +USE_STUBS = 1 +!endif + +# If OPTS is not empty AND does not contain "none" which turns off all OPTS +# set the above macros based on OPTS content +!if "$(OPTS)" != "" && ![nmakehlp -f "$(OPTS)" "none"] + +# OPTS are specified, parse them + !if [nmakehlp -f $(OPTS) "static"] !message *** Doing static STATIC_BUILD = 1 -!else -STATIC_BUILD = 0 !endif + +!if [nmakehlp -f $(OPTS) "nostubs"] +!message *** Not using stubs +USE_STUBS = 0 +!endif + !if [nmakehlp -f $(OPTS) "nomsvcrt"] !message *** Doing nomsvcrt MSVCRT = 0 !else !if [nmakehlp -f $(OPTS) "msvcrt"] @@ -247,90 +692,281 @@ MSVCRT = 1 !else MSVCRT = 0 !endif !endif -!endif +!endif # [nmakehlp -f $(OPTS) "nomsvcrt"] + !if [nmakehlp -f $(OPTS) "staticpkg"] && $(STATIC_BUILD) !message *** Doing staticpkg TCL_USE_STATIC_PACKAGES = 1 !else TCL_USE_STATIC_PACKAGES = 0 !endif + !if [nmakehlp -f $(OPTS) "nothreads"] !message *** Compile explicitly for non-threaded tcl TCL_THREADS = 0 USE_THREAD_ALLOC= 0 !else TCL_THREADS = 1 USE_THREAD_ALLOC= 1 !endif + !if [nmakehlp -f $(OPTS) "symbols"] !message *** Doing symbols DEBUG = 1 !else DEBUG = 0 !endif + !if [nmakehlp -f $(OPTS) "pdbs"] !message *** Doing pdbs SYMBOLS = 1 !else SYMBOLS = 0 !endif + !if [nmakehlp -f $(OPTS) "profile"] !message *** Doing profile PROFILE = 1 !else PROFILE = 0 !endif + !if [nmakehlp -f $(OPTS) "pgi"] !message *** Doing profile guided optimization instrumentation PGO = 1 !elseif [nmakehlp -f $(OPTS) "pgo"] !message *** Doing profile guided optimization PGO = 2 !else PGO = 0 !endif + !if [nmakehlp -f $(OPTS) "loimpact"] -!message *** Doing loimpact -LOIMPACT = 1 -!else -LOIMPACT = 0 +!message *** Warning: ignoring option "loimpact" - deprecated on modern Windows. !endif + +# TBD - should get rid of this option !if [nmakehlp -f $(OPTS) "thrdalloc"] !message *** Doing thrdalloc USE_THREAD_ALLOC = 1 !endif + !if [nmakehlp -f $(OPTS) "tclalloc"] -!message *** Doing tclalloc USE_THREAD_ALLOC = 0 !endif + !if [nmakehlp -f $(OPTS) "unchecked"] !message *** Doing unchecked UNCHECKED = 1 !else UNCHECKED = 0 !endif + +!if [nmakehlp -f $(OPTS) "noconfigcheck"] +CONFIG_CHECK = 1 +!else +CONFIG_CHECK = 0 +!endif + +!endif # "$(OPTS)" != "" && ... parsing of OPTS + +# Set linker flags based on above + +!if $(PGO) > 1 +!if [nmakehlp -l -ltcg:pgoptimize $(LINKER_TESTFLAGS)] +LINKERFLAGS = $(LINKERFLAGS:-ltcg=) -ltcg:pgoptimize +!else +MSG=^ +This compiler does not support profile guided optimization. +!error $(MSG) +!endif +!elseif $(PGO) > 0 +!if [nmakehlp -l -ltcg:pginstrument $(LINKER_TESTFLAGS)] +LINKERFLAGS = $(LINKERFLAGS:-ltcg=) -ltcg:pginstrument +!else +MSG=^ +This compiler does not support profile guided optimization. +!error $(MSG) +!endif +!endif + +################################################################ +# 7. Parse the STATS macro to configure code instrumentation +# The following macros are set by this section: +# TCL_MEM_DEBUG - 1 -> enables memory allocation instrumentation +# 0 -> disables +# TCL_COMPILE_DEBUG - 1 -> enables byte compiler logging +# 0 -> disables + +# Default both are off +TCL_MEM_DEBUG = 0 +TCL_COMPILE_DEBUG = 0 + +!if "$(STATS)" != "" && ![nmakehlp -f "$(STATS)" "none"] + +!if [nmakehlp -f $(STATS) "memdbg"] +!message *** Doing memdbg +TCL_MEM_DEBUG = 1 +!else +TCL_MEM_DEBUG = 0 +!endif + +!if [nmakehlp -f $(STATS) "compdbg"] +!message *** Doing compdbg +TCL_COMPILE_DEBUG = 1 +!else +TCL_COMPILE_DEBUG = 0 +!endif + +!endif + +#################################################################### +# 8. Parse the CHECKS macro to configure additional compiler checks +# The following macros are set by this section: +# WARNINGS - compiler switches that control the warnings level +# TCL_NO_DEPRECATED - 1 -> disable support for deprecated functions +# 0 -> enable deprecated functions + +# Defaults - Permit deprecated functions and warning level 3 +TCL_NO_DEPRECATED = 0 +WARNINGS = -W3 + +!if "$(CHECKS)" != "" && ![nmakehlp -f "$(CHECKS)" "none"] + +!if [nmakehlp -f $(CHECKS) "nodep"] +!message *** Doing nodep check +TCL_NO_DEPRECATED = 1 +!endif + +!if [nmakehlp -f $(CHECKS) "fullwarn"] +!message *** Doing full warnings check +WARNINGS = -W4 +!if [nmakehlp -l -warn:3 $(LINKER_TESTFLAGS)] +LINKERFLAGS = $(LINKERFLAGS) -warn:3 +!endif +!endif + +!if [nmakehlp -f $(CHECKS) "64bit"] && [nmakehlp -c -Wp64] +!message *** Doing 64bit portability warnings +WARNINGS = $(WARNINGS) -Wp64 +!endif + +!endif + +################################################################ +# 9. Extract various version numbers +# For Tcl and Tk, version numbers are extracted from tcl.h and tk.h +# respectively. For extensions, versions are extracted from the +# configure.in or configure.ac from the TEA configuration if it +# exists, and unset otherwise. +# Sets the following macros: +# TCL_MAJOR_VERSION +# TCL_MINOR_VERSION +# TCL_PATCH_LEVEL +# TCL_VERSION +# TK_MAJOR_VERSION +# TK_MINOR_VERSION +# TK_PATCH_LEVEL +# TK_VERSION +# DOTVERSION - set as (for example) 2.5 +# VERSION - set as (for example 25) +#-------------------------------------------------------------- + +!if [echo REM = This file is generated from rules.vc > versions.vc] +!endif +!if [echo TCL_MAJOR_VERSION = \>> versions.vc] \ + && [nmakehlp -V "$(_TCL_H)" TCL_MAJOR_VERSION >> versions.vc] +!endif +!if [echo TCL_MINOR_VERSION = \>> versions.vc] \ + && [nmakehlp -V "$(_TCL_H)" TCL_MINOR_VERSION >> versions.vc] +!endif +!if [echo TCL_PATCH_LEVEL = \>> versions.vc] \ + && [nmakehlp -V "$(_TCL_H)" TCL_PATCH_LEVEL >> versions.vc] +!endif + +!if defined(_TK_H) +!if [echo TK_MAJOR_VERSION = \>> versions.vc] \ + && [nmakehlp -V $(_TK_H) TK_MAJOR_VERSION >> versions.vc] +!endif +!if [echo TK_MINOR_VERSION = \>> versions.vc] \ + && [nmakehlp -V $(_TK_H) TK_MINOR_VERSION >> versions.vc] +!endif +!if [echo TK_PATCH_LEVEL = \>> versions.vc] \ + && [nmakehlp -V $(_TK_H) TK_PATCH_LEVEL >> versions.vc] +!endif +!endif # _TK_H + +!include versions.vc + +TCL_VERSION = $(TCL_MAJOR_VERSION)$(TCL_MINOR_VERSION) +TCL_DOTVERSION = $(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION) +!if defined(_TK_H) +TK_VERSION = $(TK_MAJOR_VERSION)$(TK_MINOR_VERSION) +TK_DOTVERSION = $(TK_MAJOR_VERSION).$(TK_MINOR_VERSION) +!endif + +# Set DOTVERSION and VERSION +!if $(DOING_TCL) + +DOTVERSION = $(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION) +VERSION = $(TCL_VERSION) + +!elseif $(DOING_TK) + +DOTVERSION = $(TK_DOTVERSION) +VERSION = $(TK_VERSION) + +!else # Doing a non-Tk extension + +# If parent makefile has not defined DOTVERSION, try to get it from TEA +# first from a configure.in file, and then from configure.ac +!ifndef DOTVERSION +!if [echo DOTVERSION = \> versions.vc] \ + || [nmakehlp -V $(ROOT)\configure.in ^[$(PROJECT)^] >> versions.vc] +!if [echo DOTVERSION = \> versions.vc] \ + || [nmakehlp -V $(ROOT)\configure.ac ^[$(PROJECT)^] >> versions.vc] +!error *** Could not figure out extension version. Please define DOTVERSION in parent makefile before including rules.vc. +!endif !endif +!include versions.vc +!endif # DOTVERSION +VERSION = $(DOTVERSION:.=) -#---------------------------------------------------------- +!endif # $(DOING_TCL) ... etc. + +################################################################ +# 10. Construct output directory and file paths # Figure-out how to name our intermediate and output directories. -# We wouldn't want different builds to use the same .obj files -# by accident. -#---------------------------------------------------------- - -#---------------------------------------- -# Naming convention: +# In order to avoid inadvertent mixing of object files built using +# different compilers, build configurations etc., +# +# Naming convention (suffixes): # t = full thread support. -# s = static library (as opposed to an -# import library) -# g = linked to the debug enabled C -# run-time. -# x = special static build when it -# links to the dynamic C run-time. -#---------------------------------------- +# s = static library (as opposed to an import library) +# g = linked to the debug enabled C run-time. +# x = special static build when it links to the dynamic C run-time. +# +# The following macros are set in this section: +# SUFX - the suffix to use for binaries based on above naming convention +# BUILDDIRTOP - the toplevel default output directory +# is of the form {Release,Debug}[_AMD64][_COMPILERVERSION] +# TMP_DIR - directory where object files are created +# OUT_DIR - directory where output executables are created +# Both TMP_DIR and OUT_DIR are defaulted only if not defined by the +# parent makefile (or command line). The default values are +# based on BUILDDIRTOP. +# STUBPREFIX - name of the stubs library for this project +# PRJIMPLIB - output path of the generated project import library +# PRJLIBNAME - name of generated project library +# PRJLIB - output path of generated project library +# PRJSTUBLIBNAME - name of the generated project stubs library +# PRJSTUBLIB - output path of the generated project stubs library +# RESFILE - output resource file (only if not static build) + SUFX = tsgx !if $(DEBUG) BUILDDIRTOP = Debug !else @@ -379,84 +1015,189 @@ !ifndef OUT_DIR OUT_DIR = $(TMP_DIR) !endif !endif - -#---------------------------------------------------------- -# Decode the statistics requested. -#---------------------------------------------------------- - -!if "$(STATS)" == "" || [nmakehlp -f "$(STATS)" "none"] -TCL_MEM_DEBUG = 0 -TCL_COMPILE_DEBUG = 0 -!else -!if [nmakehlp -f $(STATS) "memdbg"] -!message *** Doing memdbg -TCL_MEM_DEBUG = 1 -!else -TCL_MEM_DEBUG = 0 -!endif -!if [nmakehlp -f $(STATS) "compdbg"] -!message *** Doing compdbg -TCL_COMPILE_DEBUG = 1 -!else -TCL_COMPILE_DEBUG = 0 -!endif -!endif - - -#---------------------------------------------------------- -# Decode the checks requested. -#---------------------------------------------------------- - -!if "$(CHECKS)" == "" || [nmakehlp -f "$(CHECKS)" "none"] -TCL_NO_DEPRECATED = 0 -WARNINGS = -W3 -!else -!if [nmakehlp -f $(CHECKS) "nodep"] -!message *** Doing nodep check -TCL_NO_DEPRECATED = 1 -!else -TCL_NO_DEPRECATED = 0 -!endif -!if [nmakehlp -f $(CHECKS) "fullwarn"] -!message *** Doing full warnings check -WARNINGS = -W4 -!if [nmakehlp -l -warn:3 $(LINKER_TESTFLAGS)] -LINKERFLAGS = $(LINKERFLAGS) -warn:3 -!endif -!else -WARNINGS = -W3 -!endif -!if [nmakehlp -f $(CHECKS) "64bit"] && [nmakehlp -c -Wp64] -!message *** Doing 64bit portability warnings -WARNINGS = $(WARNINGS) -Wp64 -!endif -!endif - -!if $(PGO) > 1 -!if [nmakehlp -l -ltcg:pgoptimize $(LINKER_TESTFLAGS)] -LINKERFLAGS = $(LINKERFLAGS:-ltcg=) -ltcg:pgoptimize -!else -MSG=^ -This compiler does not support profile guided optimization. -!error $(MSG) -!endif -!elseif $(PGO) > 0 -!if [nmakehlp -l -ltcg:pginstrument $(LINKER_TESTFLAGS)] -LINKERFLAGS = $(LINKERFLAGS:-ltcg=) -ltcg:pginstrument -!else -MSG=^ -This compiler does not support profile guided optimization. -!error $(MSG) -!endif -!endif - -#---------------------------------------------------------- -# Set our defines now armed with our options. -#---------------------------------------------------------- +# Relative paths -> absolute +!if [echo OUT_DIR = \> nmakehlp.out] \ + || [nmakehlp -Q "$(OUT_DIR)" >> nmakehlp.out] +!error *** Could not fully qualify path OUT_DIR=$(OUT_DIR) +!endif +!if [echo TMP_DIR = \>> nmakehlp.out] \ + || [nmakehlp -Q "$(TMP_DIR)" >> nmakehlp.out] +!error *** Could not fully qualify path TMP_DIR=$(TMP_DIR) +!endif +!include nmakehlp.out + +# The name of the stubs library for the project being built +STUBPREFIX = $(PROJECT)stub + +# Set up paths to various Tcl executables and libraries needed by extensions +!if $(DOING_TCL) + +TCLSHNAME = $(PROJECT)sh$(TCL_VERSION)$(SUFX).exe +TCLSH = $(OUT_DIR)\$(TCLSHNAME) +TCLIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib +TCLLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT) +TCLLIB = $(OUT_DIR)\$(TCLLIBNAME) + +TCLSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib +TCLSTUBLIB = $(OUT_DIR)\$(TCLSTUBLIBNAME) +TCL_INCLUDES = -I"$(WINDIR)" -I"$(GENERICDIR)" + +!else # ! $(DOING_TCL) + +!if $(TCLINSTALL) # Building against an installed Tcl + +TCLSH = $(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe +!if !exist("$(TCLSH)") && $(TCL_THREADS) +TCLSH = $(_TCLDIR)\bin\tclsh$(TCL_VERSION)t$(SUFX).exe +!endif +TCLSTUBLIB = $(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib +TCLIMPLIB = $(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib +TCL_LIBRARY = $(_TCLDIR)\lib +TCLREGLIB = $(_TCLDIR)\lib\tclreg13$(SUFX:t=).lib +TCLDDELIB = $(_TCLDIR)\lib\tcldde14$(SUFX:t=).lib +TCLTOOLSDIR = \must\have\tcl\sources\to\build\this\target +TCL_INCLUDES = -I"$(_TCLDIR)\include" + +!else # Building against Tcl sources + +TCLSH = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe +!if !exist($(TCLSH)) && $(TCL_THREADS) +TCLSH = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)t$(SUFX).exe +!endif +TCLSTUBLIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib +TCLIMPLIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib +TCL_LIBRARY = $(_TCLDIR)\library +TCLREGLIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclreg13$(SUFX:t=).lib +TCLDDELIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tcldde14$(SUFX:t=).lib +TCLTOOLSDIR = $(_TCLDIR)\tools +TCL_INCLUDES = -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win" + +!endif # TCLINSTALL + +tcllibs = "$(TCLSTUBLIB)" "$(TCLIMPLIB)" + +!endif # $(DOING_TCL) + +# We need a tclsh that will run on the host machine as part of the build. +# IX86 runs on all architectures. +!ifndef TCLSH_NATIVE +!if "$(MACHINE)" == "IX86" || "$(MACHINE)" == "$(NATIVE_ARCH)" +TCLSH_NATIVE = $(TCLSH) +!else +!error You must explicitly set TCLSH_NATIVE for cross-compilation +!endif +!endif + +# Do the same for Tk and Tk extensions that require the Tk libraries +!if $(DOING_TK) || $(NEED_TK) +WISHNAMEPREFIX = wish +WISHNAME = $(WISHNAMEPREFIX)$(TK_VERSION)$(SUFX).exe +TKLIBNAME = $(PROJECT)$(TK_VERSION)$(SUFX).$(EXT) +TKSTUBLIBNAME = tkstub$(TK_VERSION).lib +TKIMPLIBNAME = tk$(TK_VERSION)$(SUFX).lib + +!if $(DOING_TK) +WISH = $(OUT_DIR)\$(WISHNAME) +TKSTUBLIB = $(OUT_DIR)\$(TKSTUBLIBNAME) +TKIMPLIB = $(OUT_DIR)\$(TKIMPLIBNAME) +TKLIB = $(OUT_DIR)\$(TKLIBNAME) +TK_INCLUDES = -I"$(WINDIR)" -I"$(GENERICDIR)" + +!else # effectively NEED_TK + +!if $(TKINSTALL) # Building against installed Tk +WISH = $(_TKDIR)\bin\$(WISHNAME) +TKSTUBLIB = $(_TKDIR)\lib\$(TKSTUBLIBNAME) +TKIMPLIB = $(_TKDIR)\lib\$(TKIMPLIBNAME) +TK_INCLUDES = -I"$(_TKDIR)\include" +!else # Building against Tk sources +WISH = $(_TKDIR)\win\$(BUILDDIRTOP)\$(WISHNAME) +TKSTUBLIB = $(_TKDIR)\win\$(BUILDDIRTOP)\$(TKSTUBLIBNAME) +TKIMPLIB = $(_TKDIR)\win\$(BUILDDIRTOP)\$(TKIMPLIBNAME) +TK_INCLUDES = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib" +!endif # TKINSTALL +tklibs = "$(TKSTUBLIB)" "$(TKIMPLIB)" + +!endif # $(DOING_TK) +!endif # $(DOING_TK) || $(NEED_TK) + +# Various output paths +PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib +PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT) +PRJLIB = $(OUT_DIR)\$(PRJLIBNAME) + +PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib +PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME) + +# If extension parent makefile has not defined a resource definition file, +# we will generate one from standard template. +!if !$(DOING_TCL) && !$(DOING_TK) && !$(STATIC_BUILD) +!ifdef RCFILE +RESFILE = $(TMP_DIR)\$(RCFILE:.rc=.res) +!else +RESFILE = $(TMP_DIR)\$(PROJECT).res +!endif +!endif + +################################################################### +# 11. Construct the paths for the installation directories +# The following macros get defined in this section: +# LIB_INSTALL_DIR - where libraries should be installed +# BIN_INSTALL_DIR - where the executables should be installed +# DOC_INSTALL_DIR - where documentation should be installed +# SCRIPT_INSTALL_DIR - where scripts should be installed +# INCLUDE_INSTALL_DIR - where C include files should be installed +# DEMO_INSTALL_DIR - where demos should be installed +# PRJ_INSTALL_DIR - where package will be installed (not set for tcl and tk) + +!if $(DOING_TCL) || $(DOING_TK) +LIB_INSTALL_DIR = $(_INSTALLDIR)\lib +BIN_INSTALL_DIR = $(_INSTALLDIR)\bin +DOC_INSTALL_DIR = $(_INSTALLDIR)\doc +!if $(DOING_TCL) +SCRIPT_INSTALL_DIR = $(_INSTALLDIR)\lib\$(PROJECT)$(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION) +!else # DOING_TK +SCRIPT_INSTALL_DIR = $(_INSTALLDIR)\lib\$(PROJECT)$(TK_MAJOR_VERSION).$(TK_MINOR_VERSION) +!endif +DEMO_INSTALL_DIR = $(SCRIPT_INSTALL_DIR)\demos +INCLUDE_INSTALL_DIR = $(_INSTALLDIR)\include + +!else # extension other than Tk + +PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION) +LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR) +BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR) +DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR) +SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR) +DEMO_INSTALL_DIR = $(PRJ_INSTALL_DIR)\demos +INCLUDE_INSTALL_DIR = $(_TCLDIR)\include + +!endif + +################################################################### +# 12. Set up actual options to be passed to the compiler and linker +# Now we have all the information we need, set up the actual flags and +# options that we will pass to the compiler and linker. The main +# makefile should use these in combination with whatever other flags +# and switches are specific to it. +# The following macros are defined, names are for historical compatibility: +# OPTDEFINES - /Dxxx C macro flags based on user-specified OPTS +# COMPILERFLAGS - /Dxxx C macro flags independent of any configuration opttions +# crt - Compiler switch that selects the appropriate C runtime +# cdebug - Compiler switches related to debug AND optimizations +# cwarn - Compiler switches that set warning levels +# cflags - complete compiler switches (subsumes cdebug and cwarn) +# ldebug - Linker switches controlling debug information and optimization +# lflags - complete linker switches (subsumes ldebug) except subsystem type +# dlllflags - complete linker switches to build DLLs (subsumes lflags) +# conlflags - complete linker switches for console program (subsumes lflags) +# guilflags - complete linker switches for GUI program (subsumes lflags) +# baselibs - minimum Windows libraries required. Parent makefile can +# define PRJ_LIBS before including rules.rc if additional libs are needed OPTDEFINES = -DTCL_CFGVAL_ENCODING=$(CFG_ENCODING) -DSTDC_HEADERS !if $(TCL_MEM_DEBUG) OPTDEFINES = $(OPTDEFINES) -DTCL_MEM_DEBUG @@ -475,224 +1216,466 @@ !endif !if $(TCL_NO_DEPRECATED) OPTDEFINES = $(OPTDEFINES) -DTCL_NO_DEPRECATED !endif +!if $(USE_STUBS) +# Note we do not define USE_TCL_STUBS even when building tk since some +# test targets in tk do not use stubs +!if ! $(DOING_TCL) +USE_STUBS_DEFS = -DUSE_TCL_STUBS -DUSE_TCLOO_STUBS +!if $(NEED_TK) +USE_STUBS_DEFS = $(USE_STUBS_DEFS) -DUSE_TK_STUBS +!endif +!endif +!endif # USE_STUBS + !if !$(DEBUG) OPTDEFINES = $(OPTDEFINES) -DNDEBUG !if $(OPTIMIZING) OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_OPTIMIZED !endif !endif !if $(PROFILE) OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_PROFILED !endif -!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64" +!if "$(MACHINE)" == "AMD64" OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_DO64BIT !endif !if $(VCVERSION) < 1300 OPTDEFINES = $(OPTDEFINES) -DNO_STRTOI64 !endif -#---------------------------------------------------------- -# Locate the Tcl headers to build against -#---------------------------------------------------------- - -!if "$(PROJECT)" == "tcl" - -_TCL_H = ..\generic\tcl.h - -!else - -# If INSTALLDIR set to tcl root dir then reset to the lib dir. -!if exist("$(_INSTALLDIR)\include\tcl.h") -_INSTALLDIR=$(_INSTALLDIR)\lib -!endif - -!if !defined(TCLDIR) -!if exist("$(_INSTALLDIR)\..\include\tcl.h") -TCLINSTALL = 1 -_TCLDIR = $(_INSTALLDIR)\.. -_TCL_H = $(_INSTALLDIR)\..\include\tcl.h -TCLDIR = $(_INSTALLDIR)\.. -!else -MSG=^ -Failed to find tcl.h. Set the TCLDIR macro. -!error $(MSG) -!endif -!else -_TCLDIR = $(TCLDIR:/=\) -!if exist("$(_TCLDIR)\include\tcl.h") -TCLINSTALL = 1 -_TCL_H = $(_TCLDIR)\include\tcl.h -!elseif exist("$(_TCLDIR)\generic\tcl.h") -TCLINSTALL = 0 -_TCL_H = $(_TCLDIR)\generic\tcl.h -!else -MSG =^ -Failed to find tcl.h. The TCLDIR macro does not appear correct. -!error $(MSG) -!endif -!endif -!endif - -#-------------------------------------------------------------- -# Extract various version numbers from tcl headers -# The generated file is then included in the makefile. -#-------------------------------------------------------------- - -!if [echo REM = This file is generated from rules.vc > versions.vc] -!endif -!if [echo TCL_MAJOR_VERSION = \>> versions.vc] \ - && [nmakehlp -V "$(_TCL_H)" TCL_MAJOR_VERSION >> versions.vc] -!endif -!if [echo TCL_MINOR_VERSION = \>> versions.vc] \ - && [nmakehlp -V "$(_TCL_H)" TCL_MINOR_VERSION >> versions.vc] -!endif -!if [echo TCL_PATCH_LEVEL = \>> versions.vc] \ - && [nmakehlp -V "$(_TCL_H)" TCL_PATCH_LEVEL >> versions.vc] -!endif - -# If building the tcl core then we need additional package versions -!if "$(PROJECT)" == "tcl" -!if [echo PKG_HTTP_VER = \>> versions.vc] \ - && [nmakehlp -V ..\library\http\pkgIndex.tcl http >> versions.vc] -!endif -!if [echo PKG_TCLTEST_VER = \>> versions.vc] \ - && [nmakehlp -V ..\library\tcltest\pkgIndex.tcl tcltest >> versions.vc] -!endif -!if [echo PKG_MSGCAT_VER = \>> versions.vc] \ - && [nmakehlp -V ..\library\msgcat\pkgIndex.tcl msgcat >> versions.vc] -!endif -!if [echo PKG_PLATFORM_VER = \>> versions.vc] \ - && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform " >> versions.vc] -!endif -!if [echo PKG_SHELL_VER = \>> versions.vc] \ - && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform::shell" >> versions.vc] -!endif -!if [echo PKG_DDE_VER = \>> versions.vc] \ - && [nmakehlp -V ..\library\dde\pkgIndex.tcl "dde " >> versions.vc] -!endif -!if [echo PKG_REG_VER =\>> versions.vc] \ - && [nmakehlp -V ..\library\reg\pkgIndex.tcl registry >> versions.vc] -!endif -!endif - -!include versions.vc - -#-------------------------------------------------------------- -# Setup tcl version dependent stuff headers -#-------------------------------------------------------------- - -!if "$(PROJECT)" != "tcl" - -TCL_VERSION = $(TCL_MAJOR_VERSION)$(TCL_MINOR_VERSION) - -!if $(TCLINSTALL) -TCLSH = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe" -!if !exist($(TCLSH)) && $(TCL_THREADS) -TCLSH = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)t$(SUFX).exe" -!endif -TCLSTUBLIB = "$(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib" -TCLIMPLIB = "$(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib" -TCL_LIBRARY = $(_TCLDIR)\lib -TCLREGLIB = "$(_TCLDIR)\lib\tclreg13$(SUFX:t=).lib" -TCLDDELIB = "$(_TCLDIR)\lib\tcldde14$(SUFX:t=).lib" -COFFBASE = \must\have\tcl\sources\to\build\this\target -TCLTOOLSDIR = \must\have\tcl\sources\to\build\this\target -TCL_INCLUDES = -I"$(_TCLDIR)\include" -!else -TCLSH = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe" -!if !exist($(TCLSH)) && $(TCL_THREADS) -TCLSH = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)t$(SUFX).exe" -!endif -TCLSTUBLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib" -TCLIMPLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib" -TCL_LIBRARY = $(_TCLDIR)\library -TCLREGLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclreg13$(SUFX:t=).lib" -TCLDDELIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcldde14$(SUFX:t=).lib" -COFFBASE = "$(_TCLDIR)\win\coffbase.txt" -TCLTOOLSDIR = $(_TCLDIR)\tools -TCL_INCLUDES = -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win" -!endif - -!endif - -#------------------------------------------------------------------------- -# Locate the Tk headers to build against -#------------------------------------------------------------------------- - -!if "$(PROJECT)" == "tk" -_TK_H = ..\generic\tk.h -_INSTALLDIR = $(_INSTALLDIR)\.. -!endif - -!ifdef PROJECT_REQUIRES_TK -!if !defined(TKDIR) -!if exist("$(_INSTALLDIR)\..\include\tk.h") -TKINSTALL = 1 -_TKDIR = $(_INSTALLDIR)\.. -_TK_H = $(_TKDIR)\include\tk.h -TKDIR = $(_TKDIR) -!elseif exist("$(_TCLDIR)\include\tk.h") -TKINSTALL = 1 -_TKDIR = $(_TCLDIR) -_TK_H = $(_TKDIR)\include\tk.h -TKDIR = $(_TKDIR) -!endif -!else -_TKDIR = $(TKDIR:/=\) -!if exist("$(_TKDIR)\include\tk.h") -TKINSTALL = 1 -_TK_H = $(_TKDIR)\include\tk.h -!elseif exist("$(_TKDIR)\generic\tk.h") -TKINSTALL = 0 -_TK_H = $(_TKDIR)\generic\tk.h -!else -MSG =^ -Failed to find tk.h. The TKDIR macro does not appear correct. -!error $(MSG) -!endif -!endif -!endif - -#------------------------------------------------------------------------- -# Extract Tk version numbers -#------------------------------------------------------------------------- - -!if defined(PROJECT_REQUIRES_TK) || "$(PROJECT)" == "tk" - -!if [echo TK_MAJOR_VERSION = \>> versions.vc] \ - && [nmakehlp -V $(_TK_H) TK_MAJOR_VERSION >> versions.vc] -!endif -!if [echo TK_MINOR_VERSION = \>> versions.vc] \ - && [nmakehlp -V $(_TK_H) TK_MINOR_VERSION >> versions.vc] -!endif -!if [echo TK_PATCH_LEVEL = \>> versions.vc] \ - && [nmakehlp -V $(_TK_H) TK_PATCH_LEVEL >> versions.vc] -!endif - -!include versions.vc - -TK_DOTVERSION = $(TK_MAJOR_VERSION).$(TK_MINOR_VERSION) -TK_VERSION = $(TK_MAJOR_VERSION)$(TK_MINOR_VERSION) - -!if "$(PROJECT)" != "tk" -!if $(TKINSTALL) -WISH = "$(_TKDIR)\bin\wish$(TK_VERSION)$(SUFX).exe" -TKSTUBLIB = "$(_TKDIR)\lib\tkstub$(TK_VERSION).lib" -TKIMPLIB = "$(_TKDIR)\lib\tk$(TK_VERSION)$(SUFX).lib" -TK_INCLUDES = -I"$(_TKDIR)\include" -!else -WISH = "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)$(SUFX).exe" -TKSTUBLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tkstub$(TCL_VERSION).lib" -TKIMPLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tk$(TCL_VERSION)$(SUFX).lib" -TK_INCLUDES = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib" -!endif -!endif - -!endif +# _ATL_XP_TARGETING - Newer SDK's need this to build for XP +COMPILERFLAGS = /D_ATL_XP_TARGETING + +# Following is primarily for the benefit of extensions. Tcl 8.5 builds +# Tcl without /DUNICODE, while 8.6 builds with it defined. When building +# an extension, it is advisable (but not mandated) to use the same Windows +# API as the Tcl build. This is accordingly defaulted below. A particular +# extension can override this by pre-definining USE_WIDECHAR_API. +!ifndef USE_WIDECHAR_API +!if $(TCL_VERSION) > 85 +USE_WIDECHAR_API = 1 +!else +USE_WIDECHAR_API = 0 +!endif +!endif + +!if $(USE_WIDECHAR_API) +COMPILERFLAGS = $(COMPILERFLAGS) /DUNICODE /D_UNICODE +!endif + +# Like the TEA system only set this non empty for non-Tk extensions +# Note: some extensions use PACKAGE_NAME and others use PACKAGE_TCLNAME +# so we pass both +!if !$(DOING_TCL) && !$(DOING_TK) +PKGNAMEFLAGS = -DPACKAGE_NAME="\"$(PRJ_PACKAGE_TCLNAME)\"" \ + -DPACKAGE_TCLNAME="\"$(PRJ_PACKAGE_TCLNAME)\"" \ + -DPACKAGE_VERSION="\"$(DOTVERSION)\"" \ + -DMODULE_SCOPE=extern +!endif + +# crt picks the C run time based on selected OPTS +!if $(MSVCRT) +!if $(DEBUG) && !$(UNCHECKED) +crt = -MDd +!else +crt = -MD +!endif +!else +!if $(DEBUG) && !$(UNCHECKED) +crt = -MTd +!else +crt = -MT +!endif +!endif + +# cdebug includes compiler options for debugging as well as optimization. +!if $(DEBUG) + +# In debugging mode, optimizations need to be disabled +cdebug = -Zi -Od $(DEBUGFLAGS) + +!else + +cdebug = $(OPTIMIZATIONS) +!if $(SYMBOLS) +cdebug = $(cdebug) -Zi +!endif + +!endif # $(DEBUG) + +# cwarn includes default warning levels. +cwarn = $(WARNINGS) + +!if "$(MACHINE)" == "AMD64" +# Disable pointer<->int warnings related to cast between different sizes +# There are a gadzillion of these due to use of ClientData and +# clutter up compiler +# output increasing chance of a real warning getting lost. So disable them. +# Eventually some day, Tcl will be 64-bit clean. +cwarn = $(cwarn) -wd4311 -wd4312 +!endif + +### Common compiler options that are architecture specific +!if "$(MACHINE)" == "ARM" +carch = -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE +!else +carch = +!endif + +!if $(DEBUG) +# Turn warnings into errors +cwarn = $(cwarn) -WX +!endif + +INCLUDES = $(TCL_INCLUDES) $(TK_INCLUDES) $(PRJ_INCLUDES) +!if !$(DOING_TCL) && !$(DOING_TK) +INCLUDES = $(INCLUDES) -I"$(GENERICDIR)" -I"$(WINDIR)" -I"$(COMPATDIR)" +!endif + +# These flags are defined roughly in the order of the pre-reform +# rules.vc/makefile.vc to help visually compare that the pre- and +# post-reform build logs + +# cflags contains generic flags used for building practically all object files +cflags = -nologo -c $(COMPILERFLAGS) $(carch) $(cwarn) -Fp$(TMP_DIR)^\ $(cdebug) + +# appcflags contains $(cflags) and flags for building the application +# object files (e.g. tclsh, or wish) pkgcflags contains $(cflags) plus +# flags used for building shared object files The two differ in the +# BUILD_$(PROJECT) macro which should be defined only for the shared +# library *implementation* and not for its caller interface + +appcflags = $(cflags) $(crt) $(INCLUDES) $(TCL_DEFINES) $(PRJ_DEFINES) $(OPTDEFINES) $(USE_STUBS_DEFS) +appcflags_nostubs = $(cflags) $(crt) $(INCLUDES) $(TCL_DEFINES) $(PRJ_DEFINES) $(OPTDEFINES) +pkgcflags = $(appcflags) $(PKGNAMEFLAGS) -DBUILD_$(PROJECT) +pkgcflags_nostubs = $(appcflags_nostubs) $(PKGNAMEFLAGS) -DBUILD_$(PROJECT) + +# stubscflags contains $(cflags) plus flags used for building a stubs +# library for the package. Note: -DSTATIC_BUILD is defined in +# $(OPTDEFINES) only if the OPTS configuration indicates a static +# library. However the stubs library is ALWAYS static hence included +# here irrespective of the OPTS setting. +# +# TBD - tclvfs has a comment that stubs libs should not be compiled with -GL +# without stating why. Tcl itself compiled stubs libs with this flag. +# so we do not remove it from cflags. -GL may prevent extensions +# compiled with one VC version to fail to link against stubs library +# compiled with another VC version. Check for this and fix accordingly. +stubscflags = $(cflags) $(PKGNAMEFLAGS) $(PRJ_DEFINES) $(OPTDEFINES) -Zl -DSTATIC_BUILD $(INCLUDES) + +# Link flags + +!if $(DEBUG) +ldebug = -debug -debugtype:cv +!else +ldebug = -release -opt:ref -opt:icf,3 +!if $(SYMBOLS) +ldebug = $(ldebug) -debug -debugtype:cv +!endif +!endif + +# Note: Profiling is currently only possible with the Visual Studio Enterprise +!if $(PROFILE) +ldebug= $(ldebug) -profile +!endif + +### Declarations common to all linker versions +lflags = -nologo -machine:$(MACHINE) $(LINKERFLAGS) $(ldebug) + +!if $(MSVCRT) && !($(DEBUG) && !$(UNCHECKED)) && $(VCVERSION) >= 1900 +lflags = $(lflags) -nodefaultlib:libucrt.lib +!endif + +# Old linkers (Visual C++ 6 in particular) will link for fast loading +# on Win98. Since we do not support Win98 any more, we specify nowin98 +# as recommended for NT and later. However, this is only required by +# IX86 on older compilers and only needed if we are not doing a static build. + +!if "$(MACHINE)" == "IX86" && !$(STATIC_BUILD) +!if [nmakehlp -l -opt:nowin98 $(LINKER_TESTFLAGS)] +# Align sections for PE size savings. +lflags = $(lflags) -opt:nowin98 +!endif +!endif + +dlllflags = $(lflags) -dll +conlflags = $(lflags) -subsystem:console +guilflags = $(lflags) -subsystem:windows + +# Libraries that are required for every image. +# Extensions should define any additional libraries with $(PRJ_LIBS) +winlibs = kernel32.lib advapi32.lib + +!if $(NEED_TK) +winlibs = $(winlibs) gdi32.lib user32.lib uxtheme.lib +!endif + +# Avoid 'unresolved external symbol __security_cookie' errors. +# c.f. http://support.microsoft.com/?id=894573 +!if "$(MACHINE)" == "AMD64" +!if $(VCVERSION) > 1399 && $(VCVERSION) < 1500 +winlibs = $(winlibs) bufferoverflowU.lib +!endif +!endif + +baselibs = $(winlibs) $(PRJ_LIBS) + +!if $(MSVCRT) && !($(DEBUG) && !$(UNCHECKED)) && $(VCVERSION) >= 1900 +baselibs = $(baselibs) ucrt.lib +!endif + +################################################################ +# 13. Define standard commands, common make targets and implicit rules + +CCPKGCMD = $(cc32) $(pkgcflags) -Fo$(TMP_DIR)^\ +CCAPPCMD = $(cc32) $(appcflags) -Fo$(TMP_DIR)^\ +CCSTUBSCMD = $(cc32) $(stubscflags) -Fo$(TMP_DIR)^\ + +LIBCMD = $(lib32) -nologo $(LINKERFLAGS) -out:$@ +DLLCMD = $(link32) $(dlllflags) -out:$@ $(baselibs) $(tcllibs) $(tklibs) + +CONEXECMD = $(link32) $(conlflags) -out:$@ $(baselibs) $(tcllibs) $(tklibs) +GUIEXECMD = $(link32) $(guilflags) -out:$@ $(baselibs) $(tcllibs) $(tklibs) +RESCMD = $(rc32) -fo $@ -r -i "$(GENERICDIR)" -i "$(TMP_DIR)" \ + $(TCL_INCLUDES) \ + -DDEBUG=$(DEBUG) -d UNCHECKED=$(UNCHECKED) \ + -DCOMMAVERSION=$(DOTVERSION:.=,),0 \ + -DDOTVERSION=\"$(DOTVERSION)\" \ + -DVERSION=\"$(VERSION)\" \ + -DSUFX=\"$(SUFX)\" \ + -DPROJECT=\"$(PROJECT)\" \ + -DPRJLIBNAME=\"$(PRJLIBNAME)\" + +!ifndef DEFAULT_BUILD_TARGET +DEFAULT_BUILD_TARGET = $(PROJECT) +!endif + +default-target: $(DEFAULT_BUILD_TARGET) + +default-pkgindex: + @echo package ifneeded $(PRJ_PACKAGE_TCLNAME) $(DOTVERSION) \ + [list load [file join $$dir $(PRJLIBNAME)]] > $(OUT_DIR)\pkgIndex.tcl + +default-pkgindex-tea: + @if exist $(ROOT)\pkgIndex.tcl.in nmakehlp -s << $(ROOT)\pkgIndex.tcl.in > $(OUT_DIR)\pkgIndex.tcl +@PACKAGE_VERSION@ $(DOTVERSION) +@PACKAGE_NAME@ $(PRJ_PACKAGE_TCLNAME) +@PACKAGE_TCLNAME@ $(PRJ_PACKAGE_TCLNAME) +@PKG_LIB_FILE@ $(PRJLIBNAME) +<< + + +default-install: default-install-binaries default-install-libraries + +default-install-binaries: $(PRJLIB) + @echo Installing binaries to '$(SCRIPT_INSTALL_DIR)' + @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)" + @$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL + +default-install-libraries: $(OUT_DIR)\pkgIndex.tcl + @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)' + @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)" + @echo Installing package index in '$(SCRIPT_INSTALL_DIR)' + @$(CPY) $(OUT_DIR)\pkgIndex.tcl $(SCRIPT_INSTALL_DIR) + +default-install-stubs: + @echo Installing stubs library to '$(SCRIPT_INSTALL_DIR)' + @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)" + @$(CPY) $(PRJSTUBLIB) "$(SCRIPT_INSTALL_DIR)" >NUL + +default-install-docs-html: + @echo Installing documentation files to '$(DOC_INSTALL_DIR)' + @if not exist "$(DOC_INSTALL_DIR)" mkdir "$(DOC_INSTALL_DIR)" + @if exist $(DOCDIR) for %f in ("$(DOCDIR)\*.html" "$(DOCDIR)\*.css" "$(DOCDIR)\*.png") do @$(COPY) %f "$(DOC_INSTALL_DIR)" + +default-install-docs-n: + @echo Installing documentation files to '$(DOC_INSTALL_DIR)' + @if not exist "$(DOC_INSTALL_DIR)" mkdir "$(DOC_INSTALL_DIR)" + @if exist $(DOCDIR) for %f in ("$(DOCDIR)\*.n") do @$(COPY) %f "$(DOC_INSTALL_DIR)" + +default-install-demos: + @echo Installing demos to '$(DEMO_INSTALL_DIR)' + @if not exist "$(DEMO_INSTALL_DIR)" mkdir "$(DEMO_INSTALL_DIR)" + @if exist $(DEMODIR) $(CPYDIR) "$(DEMODIR)" "$(DEMO_INSTALL_DIR)" + +default-clean: + @echo Cleaning $(TMP_DIR)\* ... + @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR) + @echo Cleaning $(WINDIR)\nmakehlp.obj, nmakehlp.exe ... + @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj + @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe + @if exist $(WINDIR)\nmakehlp.out del $(WINDIR)\nmakehlp.out + @echo Cleaning $(WINDIR)\nmhlp-out.txt ... + @if exist $(WINDIR)\nmhlp-out.txt del $(WINDIR)\nmhlp-out.txt + @echo Cleaning $(WINDIR)\_junk.pch ... + @if exist $(WINDIR)\_junk.pch del $(WINDIR)\_junk.pch + @echo Cleaning $(WINDIR)\vercl.x, vercl.i ... + @if exist $(WINDIR)\vercl.x del $(WINDIR)\vercl.x + @if exist $(WINDIR)\vercl.i del $(WINDIR)\vercl.i + @echo Cleaning $(WINDIR)\versions.vc, version.vc ... + @if exist $(WINDIR)\versions.vc del $(WINDIR)\versions.vc + @if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc + +default-hose: + @echo Hosing $(OUT_DIR)\* ... + @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR) + +default-distclean: default-hose + @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe + @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj + +default-setup: + @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) + @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) + +!if "$(TESTPAT)" != "" +TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT) +!endif + +default-test: default-setup $(PROJECT) + @set TCLLIBPATH=$(OUT_DIR:\=/) + @if exist $(LIBDIR) for %f in ("$(LIBDIR)\*.tcl") do @$(COPY) %f "$(OUT_DIR)" + cd "$(TESTDIR)" && $(DEBUGGER) $(TCLSH) all.tcl $(TESTFLAGS) + +default-shell: default-setup $(PROJECT) + @set TCLLIBPATH=$(OUT_DIR:\=/) + @if exist $(LIBDIR) for %f in ("$(LIBDIR)\*.tcl") do @$(COPY) %f "$(OUT_DIR)" + $(DEBUGGER) $(TCLSH) + +# Generation of Windows version resource +!ifdef RCFILE + +# Note: don't use $** in below rule because there may be other dependencies +# and only the "master" rc must be passed to the resource compiler +$(TMP_DIR)\$(PROJECT).res: $(RCDIR)\$(PROJECT).rc + $(RESCMD) $(RCDIR)\$(PROJECT).rc + +!else + +# If parent makefile has not defined a resource definition file, +# we will generate one from standard template. +$(TMP_DIR)\$(PROJECT).res: $(TMP_DIR)\$(PROJECT).rc + +$(TMP_DIR)\$(PROJECT).rc: + @$(COPY) << $(TMP_DIR)\$(PROJECT).rc +#include + +VS_VERSION_INFO VERSIONINFO + FILEVERSION COMMAVERSION + PRODUCTVERSION COMMAVERSION + FILEFLAGSMASK 0x3fL +#ifdef DEBUG + FILEFLAGS VS_FF_DEBUG +#else + FILEFLAGS 0x0L +#endif + FILEOS VOS_NT_WINDOWS32 + FILETYPE VFT_DLL + FILESUBTYPE 0x0L +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904b0" + BEGIN + VALUE "FileDescription", "Tcl extension " PROJECT + VALUE "OriginalFilename", PRJLIBNAME + VALUE "FileVersion", DOTVERSION + VALUE "ProductName", "Package " PROJECT " for Tcl" + VALUE "ProductVersion", DOTVERSION + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x409, 1200 + END +END + +<< + +!endif # ifdef RCFILE + +!ifndef DISABLE_IMPLICIT_RULES +DISABLE_IMPLICIT_RULES = 0 +!endif + +!if !$(DISABLE_IMPLICIT_RULES) +# Implicit rule definitions - only for building library objects. For stubs and +# main application, the master makefile should define explicit rules. + +{$(ROOT)}.c{$(TMP_DIR)}.obj:: + $(CCPKGCMD) @<< +$< +<< + +{$(WINDIR)}.c{$(TMP_DIR)}.obj:: + $(CCPKGCMD) @<< +$< +<< + +{$(GENERICDIR)}.c{$(TMP_DIR)}.obj:: + $(CCPKGCMD) @<< +$< +<< + +{$(COMPATDIR)}.c{$(TMP_DIR)}.obj:: + $(CCPKGCMD) @<< +$< +<< + +{$(RCDIR)}.rc{$(TMP_DIR)}.res: + $(RESCMD) $< + +{$(WINDIR)}.rc{$(TMP_DIR)}.res: + $(RESCMD) $< + +{$(TMP_DIR)}.rc{$(TMP_DIR)}.res: + $(RESCMD) $< + +.SUFFIXES: +.SUFFIXES:.c .rc + +!endif + +################################################################ +# 14. Sanity check selected options against Tcl build options +# When building an extension, certain configuration options should +# match the ones used when Tcl was built. Here we check and +# warn on a mismatch. +!if ! $(DOING_TCL) + +!if $(TCLINSTALL) # Building against an installed Tcl +!if exist("$(_TCLDIR)\lib\nmake\tcl.nmake") +TCLNMAKECONFIG = "$(_TCLDIR)\lib\nmake\tcl.nmake" +!endif +!else # ! $(TCLINSTALL) - building against Tcl source +!if exist("$(OUT_DIR)\tcl.nmake") +TCLNMAKECONFIG = "$(OUT_DIR)\tcl.nmake" +!endif +!endif # TCLINSTALL + +!if $(CONFIG_CHECK) +!ifdef TCLNMAKECONFIG +!include $(TCLNMAKECONFIG) + +!if defined(CORE_MACHINE) && "$(CORE_MACHINE)" != "$(MACHINE)" +!error ERROR: Build target ($(MACHINE)) does not match the Tcl library architecture ($(CORE_MACHINE)). +!endif +!if defined(CORE_USE_THREAD_ALLOC) && $(CORE_USE_THREAD_ALLOC) != $(USE_THREAD_ALLOC) +!message WARNING: Value of USE_THREAD_ALLOC ($(USE_THREAD_ALLOC)) does not match its Tcl core value ($(CORE_USE_THREAD_ALLOC)). +!endif +!if defined(CORE_DEBUG) && $(CORE_DEBUG) != $(DEBUG) +!message WARNING: Value of DEBUG ($(DEBUG)) does not match its Tcl library configuration ($(DEBUG)). +!endif +!endif + +!endif # TCLNMAKECONFIG + +!endif # ! $(DOING_TCL) + #---------------------------------------------------------- # Display stats being used. #---------------------------------------------------------- @@ -700,9 +1683,7 @@ !message *** Output directory will be '$(OUT_DIR)' !message *** Suffix for binaries will be '$(SUFX)' !message *** Optional defines are '$(OPTDEFINES)' !message *** Compiler version $(VCVER). Target machine is $(MACHINE) !message *** Host architecture is $(NATIVE_ARCH) -!message *** Compiler options '$(COMPILERFLAGS) $(OPTIMIZATIONS) $(DEBUGFLAGS) $(WARNINGS)' -!message *** Link options '$(LINKERFLAGS)' -!endif +!endif # ifdef _RULES_VC ADDED win/targets.vc Index: win/targets.vc ================================================================== --- /dev/null +++ win/targets.vc @@ -0,0 +1,52 @@ +#------------------------------------------------------------- -*- makefile -*- +# targets.vc -- +# +# Part of the nmake based build system for Tcl and its extensions. +# This file defines some standard targets for the convenience of extensions +# and can be optionally included by the extension makefile. +# See TIP 477 (https://core.tcl.tk/tips/doc/trunk/tip/477.md) for docs. + +$(PROJECT): setup pkgindex $(PRJLIB) + +!ifdef PRJ_STUBOBJS +$(PROJECT): $(PRJSTUBLIB) +$(PRJSTUBLIB): $(PRJ_STUBOBJS) + $(LIBCMD) $** + +$(PRJ_STUBOBJS): + $(CCSTUBSCMD) %s +!endif # PRJ_STUBOBJS + +!ifdef PRJ_MANIFEST +$(PROJECT): $(PRJLIB).manifest +$(PRJLIB).manifest: $(PRJ_MANIFEST) + @nmakehlp -s << $** >$@ +@MACHINE@ $(MACHINE:IX86=X86) +<< +!endif + +!if "$(PROJECT)" != "tcl" && "$(PROJECT)" != "tk" +$(PRJLIB): $(PRJ_OBJS) $(RESFILE) +!if $(STATIC_BUILD) + $(LIBCMD) $** +!else + $(DLLCMD) $** + $(_VC_MANIFEST_EMBED_DLL) +!endif + -@del $*.exp +!endif + +!ifndef DISABLE_STANDARD_TARGETS +DISABLE_STANDARD_TARGETS = 0 +!endif + +!if !$(DISABLE_STANDARD_TARGETS) +setup: default-setup +install: default-install +clean: default-clean +realclean: hose +hose: default-hose +distclean: realclean default-distclean +test: default-test +shell: default-shell +!endif Index: win/tcl.rc ================================================================== --- win/tcl.rc +++ win/tcl.rc @@ -1,28 +1,10 @@ // Version Resource Script // #include #include - -// -// build-up the name suffix that defines the type of build this is. -// -#if TCL_THREADS -#define SUFFIX_THREADS "t" -#else -#define SUFFIX_THREADS "" -#endif - -#if DEBUG && !UNCHECKED -#define SUFFIX_DEBUG "g" -#else -#define SUFFIX_DEBUG "" -#endif - -#define SUFFIX SUFFIX_THREADS SUFFIX_DEBUG - LANGUAGE 0x9, 0x1 /* LANG_ENGLISH, SUBLANG_DEFAULT */ VS_VERSION_INFO VERSIONINFO FILEVERSION TCL_MAJOR_VERSION,TCL_MINOR_VERSION,TCL_RELEASE_LEVEL,TCL_RELEASE_SERIAL @@ -40,11 +22,11 @@ BLOCK "StringFileInfo" BEGIN BLOCK "040904b0" /* LANG_ENGLISH/SUBLANG_ENGLISH_US, Unicode CP */ BEGIN VALUE "FileDescription", "Tcl DLL\0" - VALUE "OriginalFilename", "tcl" STRINGIFY(TCL_MAJOR_VERSION) STRINGIFY(TCL_MINOR_VERSION) SUFFIX ".dll\0" + VALUE "OriginalFilename", PRJLIBNAME VALUE "CompanyName", "ActiveState Corporation\0" VALUE "FileVersion", TCL_PATCH_LEVEL VALUE "LegalCopyright", "Copyright \251 2001 by ActiveState Corporation, et al\0" VALUE "ProductName", "Tcl " TCL_VERSION " for Windows\0" VALUE "ProductVersion", TCL_PATCH_LEVEL