#------------------------------------------------------------- -*- makefile -*-
# makefile.vc --
#
# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# Copyright (c) 1995-1996 Sun Microsystems, Inc.
# Copyright (c) 1998-2000 Ajuba Solutions.
# Copyright (c) 2001-2005 ActiveState Corporation.
# Copyright (c) 2001-2004 David Gravereaux.
# Copyright (c) 2003-2008 Pat Thoyts.
#------------------------------------------------------------------------------
# Check to see we are configured to build with MSVC (MSDEVDIR, MSVCDIR or
# VCINSTALLDIR) or with the MS Platform SDK (MSSDK or WindowsSDKDir)
!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR)
MSG = ^
You need to run vcvars32.bat from Developer Studio or setenv.bat from the^
Platform SDK first to setup the environment. Jump to this line to read^
the build instructions.
!error $(MSG)
!endif
#------------------------------------------------------------------------------
# HOW TO USE this makefile:
#
# 1) It is now necessary to have MSVCDir, MSDevDir or MSSDK set in the
# environment. This is used as a check to see if vcvars32.bat had been
# run prior to running nmake or during the installation of Microsoft
# Visual C++, MSVCDir had been set globally and the PATH adjusted.
# Either way is valid.
#
# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
# directory to setup the proper environment, if needed, for your
# current setup. This is a needed bootstrap requirement and allows the
# swapping of different environments to be easier.
#
# 2) To use the Platform SDK (not expressly needed), run setenv.bat after
# vcvars32.bat according to the instructions for it. This can also
# turn on the 64-bit compiler, if your SDK has it.
#
# 3) Targets are:
# release -- Builds the core, the shell and the dlls. (default)
# dlls -- Just builds the windows extensions
# shell -- Just builds the shell and the core.
# core -- Only builds the core [tclXX.(dll|lib)].
# all -- Builds everything.
# test -- Builds and runs the test suite.
# tcltest -- Just builds the test shell.
# install -- Installs the built binaries and libraries to $(INSTALLDIR)
# as the root of the install tree.
# tidy/clean/hose -- varying levels of cleaning.
# genstubs -- Rebuilds the Stubs table and support files (dev only).
# depend -- Generates an accurate set of source dependancies for this
# makefile. Helpful to avoid problems when the sources are
# refreshed and you rebuild, but can "overbuild" when common
# headers like tclInt.h just get small changes.
# htmlhelp -- Builds a Windows .chm help file for Tcl and Tk from the
# troff manual pages found in $(ROOT)\doc. You need to
# have installed the HTML Help Compiler package from Microsoft
# to produce the .chm file.
# winhelp -- (deprecated) Builds the windows .hlp file for Tcl from
# the troff man files found in $(ROOT)\doc. This type of
# help file is deprecated by Microsoft in favour of html
# help files (.chm)
#
# 4) Macros usable on the commandline:
# INSTALLDIR=<path>
# Sets where to install Tcl from the built binaries.
# C:\Progra~1\Tcl is assumed when not specified.
#
# OPTS=loimpact,msvcrt,nothreads,pdbs,profile,static,staticpkg,symbols,thrdalloc,tclalloc,unchecked,none
# Sets special options for the core. The default is for none.
# Any combination of the above may be used (comma separated).
# 'none' will over-ride everything to nothing.
#
# loimpact = Adds a flag for how NT treats the heap to keep memory
# in use, low. This is said to impact alloc performance.
# msvcrt = Affects the static option only to switch it from
# using libcmt(d) as the C runtime [by default] to
# msvcrt(d). This is useful for static embedding
# support.
# nothreads= Turns off full multithreading support.
# pdbs = Build detached symbols for release builds.
# profile = Adds profiling hooks. Map file is assumed.
# static = Builds a static library of the core instead of a
# dll. The static library will contain the dde and reg
# extensions. External applications who want to use
# this, need to link with the stub library as well as
# the static Tcl library.The shell will be static (and
# large), as well.
# staticpkg = Affects the static option only to switch
# tclshXX.exe to have the dde and reg extension linked
# inside it.
# symbols = Debug build. Links to the debug C runtime, disables
# optimizations and creates pdb symbols files.
# thrdalloc = Use the thread allocator (shared global free pool)
# This is the default on threaded builds.
# tclalloc = Use the old non-thread allocator
# unchecked= Allows a symbols build to not use the debug
# enabled runtime (msvcrt.dll not msvcrtd.dll
# or libcmt.lib not libcmtd.lib).
#
# STATS=compdbg,memdbg,none
# Sets optional memory and bytecode compiler debugging code added
# to the core. The default is for none. Any combination of the
# above may be used (comma separated). 'none' will over-ride
# everything to nothing.
#
# compdbg = Enables byte compilation logging.
# memdbg = Enables the debugging memory allocator.
#
# CHECKS=64bit,fullwarn,nodep,none
# Sets special macros for checking compatability.
#
# 64bit = Enable 64bit portability warnings (if available)
# fullwarn = Builds with full compiler and link warnings enabled.
# Very verbose.
# nodep = Turns off compatability macros to ensure the core
# isn't being built with deprecated functions.
#
# MACHINE=(ALPHA|AMD64|IA64|IX86)
# Set the machine type used for the compiler, linker, and
# resource compiler. This hook is needed to tell the tools
# when alternate platforms are requested. IX86 is the default
# when not specified. If the CPU environment variable has been
# set (ie: recent Platform SDK) then MACHINE is set from CPU.
#
# TMP_DIR=<path>
# OUT_DIR=<path>
# Hooks to allow the intermediate and output directories to be
# changed. $(OUT_DIR) is assumed to be
# $(BINROOT)\(Release|Debug) based on if symbols are requested.
# $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
#
# TESTPAT=<file>
# Reads the tests requested to be run from this file.
#
# CFG_ENCODING=encoding
# name of encoding for configuration information. Defaults
# to cp1252
#
# 5) Examples:
#
# Basic syntax of calling nmake looks like this:
# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
#
# Standard (no frills)
# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
# Setting environment for using Microsoft Visual C++ tools.
# c:\tcl_src\win\>nmake -f makefile.vc release
# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
#
# Building for Win64
# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
# Setting environment for using Microsoft Visual C++ tools.
# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
# Targeting Windows pre64 RETAIL
# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
#
#------------------------------------------------------------------------------
#==============================================================================
###############################################################################
# //==================================================================\\
# >>[ -> Do not modify below this line. <- ]<<
# >>[ Please, use the commandline macros to modify how Tcl is built. ]<<
# >>[ If you need more features, send us a patch for more macros. ]<<
# \\==================================================================//
###############################################################################
#==============================================================================
#------------------------------------------------------------------------------
!if !exist("makefile.vc")
MSG = ^
You must run this makefile only from the directory it is in.^
Please `cd` to its location first.
!error $(MSG)
!endif
PROJECT = tcl
!include "rules.vc"
STUBPREFIX = $(PROJECT)stub
DOTVERSION = $(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION)
VERSION = $(TCL_MAJOR_VERSION)$(TCL_MINOR_VERSION)
DDEDOTVERSION = 1.4
DDEVERSION = $(DDEDOTVERSION:.=)
REGDOTVERSION = 1.3
REGVERSION = $(REGDOTVERSION:.=)
BINROOT = $(MAKEDIR) # originally .
ROOT = $(MAKEDIR)\.. # originally ..
TCLIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
TCLLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT)
TCLLIB = $(OUT_DIR)\$(TCLLIBNAME)
TCLSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib
TCLSTUBLIB = $(OUT_DIR)\$(TCLSTUBLIBNAME)
TCLSHNAME = $(PROJECT)sh$(VERSION)$(SUFX).exe
TCLSH = $(OUT_DIR)\$(TCLSHNAME)
TCLREGLIBNAME = $(PROJECT)reg$(REGVERSION)$(SUFX:t=).$(EXT)
TCLREGLIB = $(OUT_DIR)\$(TCLREGLIBNAME)
TCLDDELIBNAME = $(PROJECT)dde$(DDEVERSION)$(SUFX:t=).$(EXT)
TCLDDELIB = $(OUT_DIR)\$(TCLDDELIBNAME)
TCLTEST = $(OUT_DIR)\$(PROJECT)test.exe
CAT32 = $(OUT_DIR)\cat32.exe
# Can we run what we build? IX86 runs on all architectures.
!ifndef TCLSH_NATIVE
!if "$(MACHINE)" == "IX86" || "$(MACHINE)" == "$(NATIVE_ARCH)"
TCLSH_NATIVE = $(TCLSH)
!else
!error You must explicitly set TCLSH_NATIVE for cross-compilation
!endif
!endif
### Make sure we use backslash only.
LIB_INSTALL_DIR = $(_INSTALLDIR)\lib
BIN_INSTALL_DIR = $(_INSTALLDIR)\bin
DOC_INSTALL_DIR = $(_INSTALLDIR)\doc
SCRIPT_INSTALL_DIR = $(_INSTALLDIR)\lib\tcl$(DOTVERSION)
INCLUDE_INSTALL_DIR = $(_INSTALLDIR)\include
TCLSHOBJS = \
$(TMP_DIR)\tclAppInit.obj \
!if !$(STATIC_BUILD)
!if $(TCL_USE_STATIC_PACKAGES)
$(TMP_DIR)\tclWinReg.obj \
$(TMP_DIR)\tclWinDde.obj \
!endif
!endif
$(TMP_DIR)\tclsh.res
TCLTESTOBJS = \
$(TMP_DIR)\tclTest.obj \
$(TMP_DIR)\tclTestObj.obj \
$(TMP_DIR)\tclTestProcBodyObj.obj \
$(TMP_DIR)\tclThreadTest.obj \
$(TMP_DIR)\tclWinTest.obj \
!if !$(STATIC_BUILD)
!if $(TCL_USE_STATIC_PACKAGES)
$(TMP_DIR)\tclWinReg.obj \
$(TMP_DIR)\tclWinDde.obj \
!endif
!endif
$(TMP_DIR)\testMain.obj
COREOBJS = \
$(TMP_DIR)\regcomp.obj \
$(TMP_DIR)\regerror.obj \
$(TMP_DIR)\regexec.obj \
$(TMP_DIR)\regfree.obj \
$(TMP_DIR)\tclAlloc.obj \
$(TMP_DIR)\tclAssembly.obj \
$(TMP_DIR)\tclAsync.obj \
$(TMP_DIR)\tclBasic.obj \
$(TMP_DIR)\tclBinary.obj \
$(TMP_DIR)\tclCkalloc.obj \
$(TMP_DIR)\tclClock.obj \
$(TMP_DIR)\tclCmdAH.obj \
$(TMP_DIR)\tclCmdIL.obj \
$(TMP_DIR)\tclCmdMZ.obj \
$(TMP_DIR)\tclCompCmds.obj \
$(TMP_DIR)\tclCompCmdsGR.obj \
$(TMP_DIR)\tclCompCmdsSZ.obj \
$(TMP_DIR)\tclCompExpr.obj \
$(TMP_DIR)\tclCompile.obj \
$(TMP_DIR)\tclConfig.obj \
$(TMP_DIR)\tclDate.obj \
$(TMP_DIR)\tclDictObj.obj \
$(TMP_DIR)\tclEncoding.obj \
$(TMP_DIR)\tclEnsemble.obj \
$(TMP_DIR)\tclEnv.obj \
$(TMP_DIR)\tclEvent.obj \
$(TMP_DIR)\tclExecute.obj \
$(TMP_DIR)\tclFCmd.obj \
$(TMP_DIR)\tclFileName.obj \
$(TMP_DIR)\tclGet.obj \
$(TMP_DIR)\tclHash.obj \
$(TMP_DIR)\tclHistory.obj \
$(TMP_DIR)\tclIndexObj.obj \
$(TMP_DIR)\tclInterp.obj \
$(TMP_DIR)\tclIO.obj \
$(TMP_DIR)\tclIOCmd.obj \
$(TMP_DIR)\tclIOGT.obj \
$(TMP_DIR)\tclIOSock.obj \
$(TMP_DIR)\tclIOUtil.obj \
$(TMP_DIR)\tclIORChan.obj \
$(TMP_DIR)\tclIORTrans.obj \
$(TMP_DIR)\tclLink.obj \
$(TMP_DIR)\tclListObj.obj \
$(TMP_DIR)\tclLiteral.obj \
$(TMP_DIR)\tclLoad.obj \
$(TMP_DIR)\tclMain.obj \
$(TMP_DIR)\tclMain2.obj \
$(TMP_DIR)\tclNamesp.obj \
$(TMP_DIR)\tclNotify.obj \
$(TMP_DIR)\tclOO.obj \
$(TMP_DIR)\tclOOBasic.obj \
$(TMP_DIR)\tclOOCall.obj \
$(TMP_DIR)\tclOODefineCmds.obj \
$(TMP_DIR)\tclOOInfo.obj \
$(TMP_DIR)\tclOOMethod.obj \
$(TMP_DIR)\tclOOStubInit.obj \
$(TMP_DIR)\tclObj.obj \
$(TMP_DIR)\tclOptimize.obj \
$(TMP_DIR)\tclPanic.obj \
$(TMP_DIR)\tclParse.obj \
$(TMP_DIR)\tclPathObj.obj \
$(TMP_DIR)\tclPipe.obj \
$(TMP_DIR)\tclPkg.obj \
$(TMP_DIR)\tclPkgConfig.obj \
$(TMP_DIR)\tclPosixStr.obj \
$(TMP_DIR)\tclPreserve.obj \
$(TMP_DIR)\tclProc.obj \
$(TMP_DIR)\tclRegexp.obj \
$(TMP_DIR)\tclResolve.obj \
$(TMP_DIR)\tclResult.obj \
$(TMP_DIR)\tclScan.obj \
$(TMP_DIR)\tclStringObj.obj \
$(TMP_DIR)\tclStrToD.obj \
$(TMP_DIR)\tclStubInit.obj \
$(TMP_DIR)\tclThread.obj \
$(TMP_DIR)\tclThreadAlloc.obj \
$(TMP_DIR)\tclThreadJoin.obj \
$(TMP_DIR)\tclThreadStorage.obj \
$(TMP_DIR)\tclTimer.obj \
$(TMP_DIR)\tclTomMathInterface.obj \
$(TMP_DIR)\tclTrace.obj \
$(TMP_DIR)\tclUtf.obj \
$(TMP_DIR)\tclUtil.obj \
$(TMP_DIR)\tclVar.obj \
$(TMP_DIR)\tclZlib.obj
ZLIBOBJS = \
$(TMP_DIR)\adler32.obj \
$(TMP_DIR)\compress.obj \
$(TMP_DIR)\crc32.obj \
$(TMP_DIR)\deflate.obj \
$(TMP_DIR)\infback.obj \
$(TMP_DIR)\inffast.obj \
$(TMP_DIR)\inflate.obj \
$(TMP_DIR)\inftrees.obj \
$(TMP_DIR)\trees.obj \
$(TMP_DIR)\uncompr.obj \
$(TMP_DIR)\zutil.obj
TOMMATHOBJS = \
$(TMP_DIR)\bncore.obj \
$(TMP_DIR)\bn_reverse.obj \
$(TMP_DIR)\bn_fast_s_mp_mul_digs.obj \
$(TMP_DIR)\bn_fast_s_mp_sqr.obj \
$(TMP_DIR)\bn_mp_add.obj \
$(TMP_DIR)\bn_mp_add_d.obj \
$(TMP_DIR)\bn_mp_and.obj \
$(TMP_DIR)\bn_mp_clamp.obj \
$(TMP_DIR)\bn_mp_clear.obj \
$(TMP_DIR)\bn_mp_clear_multi.obj \
$(TMP_DIR)\bn_mp_cmp.obj \
$(TMP_DIR)\bn_mp_cmp_d.obj \
$(TMP_DIR)\bn_mp_cmp_mag.obj \
$(TMP_DIR)\bn_mp_cnt_lsb.obj \
$(TMP_DIR)\bn_mp_copy.obj \
$(TMP_DIR)\bn_mp_count_bits.obj \
$(TMP_DIR)\bn_mp_div.obj \
$(TMP_DIR)\bn_mp_div_d.obj \
$(TMP_DIR)\bn_mp_div_2.obj \
$(TMP_DIR)\bn_mp_div_2d.obj \
$(TMP_DIR)\bn_mp_div_3.obj \
$(TMP_DIR)\bn_mp_exch.obj \
$(TMP_DIR)\bn_mp_expt_d.obj \
$(TMP_DIR)\bn_mp_grow.obj \
$(TMP_DIR)\bn_mp_init.obj \
$(TMP_DIR)\bn_mp_init_copy.obj \
$(TMP_DIR)\bn_mp_init_multi.obj \
$(TMP_DIR)\bn_mp_init_set.obj \
$(TMP_DIR)\bn_mp_init_set_int.obj \
$(TMP_DIR)\bn_mp_init_size.obj \
$(TMP_DIR)\bn_mp_karatsuba_mul.obj \
$(TMP_DIR)\bn_mp_karatsuba_sqr.obj \
$(TMP_DIR)\bn_mp_lshd.obj \
$(TMP_DIR)\bn_mp_mod.obj \
$(TMP_DIR)\bn_mp_mod_2d.obj \
$(TMP_DIR)\bn_mp_mul.obj \
$(TMP_DIR)\bn_mp_mul_2.obj \
$(TMP_DIR)\bn_mp_mul_2d.obj \
$(TMP_DIR)\bn_mp_mul_d.obj \
$(TMP_DIR)\bn_mp_neg.obj \
$(TMP_DIR)\bn_mp_or.obj \
$(TMP_DIR)\bn_mp_radix_size.obj \
$(TMP_DIR)\bn_mp_radix_smap.obj \
$(TMP_DIR)\bn_mp_read_radix.obj \
$(TMP_DIR)\bn_mp_rshd.obj \
$(TMP_DIR)\bn_mp_set.obj \
$(TMP_DIR)\bn_mp_set_int.obj \
$(TMP_DIR)\bn_mp_shrink.obj \
$(TMP_DIR)\bn_mp_sqr.obj \
$(TMP_DIR)\bn_mp_sqrt.obj \
$(TMP_DIR)\bn_mp_sub.obj \
$(TMP_DIR)\bn_mp_sub_d.obj \
$(TMP_DIR)\bn_mp_to_unsigned_bin.obj \
$(TMP_DIR)\bn_mp_to_unsigned_bin_n.obj \
$(TMP_DIR)\bn_mp_toom_mul.obj \
$(TMP_DIR)\bn_mp_toom_sqr.obj \
$(TMP_DIR)\bn_mp_toradix_n.obj \
$(TMP_DIR)\bn_mp_unsigned_bin_size.obj \
$(TMP_DIR)\bn_mp_xor.obj \
$(TMP_DIR)\bn_mp_zero.obj \
$(TMP_DIR)\bn_s_mp_add.obj \
$(TMP_DIR)\bn_s_mp_mul_digs.obj \
$(TMP_DIR)\bn_s_mp_sqr.obj \
$(TMP_DIR)\bn_s_mp_sub.obj
PLATFORMOBJS = \
$(TMP_DIR)\tclWin32Dll.obj \
$(TMP_DIR)\tclWinChan.obj \
$(TMP_DIR)\tclWinConsole.obj \
$(TMP_DIR)\tclWinError.obj \
$(TMP_DIR)\tclWinFCmd.obj \
$(TMP_DIR)\tclWinFile.obj \
$(TMP_DIR)\tclWinInit.obj \
$(TMP_DIR)\tclWinLoad.obj \
$(TMP_DIR)\tclWinNotify.obj \
$(TMP_DIR)\tclWinPipe.obj \
$(TMP_DIR)\tclWinSerial.obj \
$(TMP_DIR)\tclWinSock.obj \
$(TMP_DIR)\tclWinThrd.obj \
$(TMP_DIR)\tclWinTime.obj \
!if $(STATIC_BUILD)
$(TMP_DIR)\tclWinReg.obj \
$(TMP_DIR)\tclWinDde.obj \
!else
$(TMP_DIR)\tcl.res
!endif
TCLOBJS = $(COREOBJS) $(ZLIBOBJS) $(TOMMATHOBJS) $(PLATFORMOBJS)
TCLSTUBOBJS = \
$(TMP_DIR)\tclStubLib.obj \
$(TMP_DIR)\tclTomMathStubLib.obj \
$(TMP_DIR)\tclOOStubLib.obj
### The following paths CANNOT have spaces in them.
COMPATDIR = $(ROOT)\compat
DOCDIR = $(ROOT)\doc
GENERICDIR = $(ROOT)\generic
TOMMATHDIR = $(ROOT)\libtommath
TOOLSDIR = $(ROOT)\tools
WINDIR = $(ROOT)\win
PKGSDIR = $(ROOT)\pkgs
#---------------------------------------------------------------------
# Compile flags
#---------------------------------------------------------------------
!if !$(DEBUG)
!if $(OPTIMIZING)
### This cranks the optimization level to maximize speed
cdebug = -O2 $(OPTIMIZATIONS)
!else
cdebug =
!endif
!if $(SYMBOLS)
cdebug = $(cdebug) -Zi
!endif
!else if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64"
### Warnings are too many, can't support warnings into errors.
cdebug = -Zi -Od $(DEBUGFLAGS)
!else
cdebug = -Zi -WX $(DEBUGFLAGS)
!endif
### Declarations common to all compiler options
cwarn = $(WARNINGS) -D _CRT_SECURE_NO_DEPRECATE -D _CRT_NONSTDC_NO_DEPRECATE
cflags = -nologo -c $(COMPILERFLAGS) $(cwarn) -Fp$(TMP_DIR)^\
!if $(MSVCRT)
!if $(DEBUG) && !$(UNCHECKED)
crt = -MDd
!else
crt = -MD
!endif
!else
!if $(DEBUG) && !$(UNCHECKED)
crt = -MTd
!else
crt = -MT
!endif
!endif
TCL_INCLUDES = -I"$(WINDIR)" -I"$(GENERICDIR)" -I"$(TOMMATHDIR)"
TCL_DEFINES = -DTCL_TOMMATH -DMP_PREC=4 -Dinline=__inline -DHAVE_ZLIB=1
BASE_CFLAGS = $(cflags) $(cdebug) $(crt) $(TCL_INCLUDES) $(TCL_DEFINES)
CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE
TCL_CFLAGS = $(BASE_CFLAGS) $(OPTDEFINES)
STUB_CFLAGS = $(cflags) $(cdebug) $(OPTDEFINES)
#---------------------------------------------------------------------
# Link flags
#---------------------------------------------------------------------
!if $(DEBUG)
ldebug = -debug -debugtype:cv
!else
ldebug = -release -opt:ref -opt:icf,3
!if $(SYMBOLS)
ldebug = $(ldebug) -debug -debugtype:cv
!endif
!endif
### Declarations common to all linker options
lflags = -nologo -machine:$(MACHINE) $(LINKERFLAGS) $(ldebug)
!if $(PROFILE)
lflags = $(lflags) -profile
!endif
!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
### Align sections for PE size savings.
lflags = $(lflags) -opt:nowin98
!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
### Align sections for speed in loading by choosing the virtual page size.
lflags = $(lflags) -align:4096
!endif
!if $(LOIMPACT)
lflags = $(lflags) -ws:aggressive
!endif
dlllflags = $(lflags) -dll
conlflags = $(lflags) -subsystem:console
guilflags = $(lflags) -subsystem:windows
baselibs = netapi32.lib kernel32.lib user32.lib advapi32.lib ws2_32.lib
# Avoid 'unresolved external symbol __security_cookie' errors.
# c.f. http://support.microsoft.com/?id=894573
!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64"
!if $(VCVERSION) > 1399 && $(VCVERSION) < 1500
baselibs = $(baselibs) bufferoverflowU.lib
!endif
!endif
#---------------------------------------------------------------------
# TclTest flags
#---------------------------------------------------------------------
!if "$(TESTPAT)" != ""
TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
!endif
#---------------------------------------------------------------------
# Project specific targets
#---------------------------------------------------------------------
release: setup $(TCLSH) $(TCLSTUBLIB) dlls pkgs
core: setup $(TCLLIB) $(TCLSTUBLIB)
shell: setup $(TCLSH)
dlls: setup $(TCLREGLIB) $(TCLDDELIB)
all: setup $(TCLSH) $(TCLSTUBLIB) dlls $(CAT32) pkgs
tcltest: setup $(TCLTEST) dlls $(CAT32)
install: install-binaries install-libraries install-docs install-pkgs
test: test-core test-pkgs
test-core: setup $(TCLTEST) dlls $(CAT32)
set TCL_LIBRARY=$(ROOT:\=/)/library
!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE"
$(DEBUGGER) $(TCLTEST) "$(ROOT:\=/)/tests/all.tcl" $(TESTFLAGS) -loadfile <<
package ifneeded dde 1.4.0 [list load "$(TCLDDELIB:\=/)" dde]
package ifneeded registry 1.3.0 [list load "$(TCLREGLIB:\=/)" registry]
<<
!else
@echo Please wait while the tests are collected...
$(TCLTEST) "$(ROOT:\=/)/tests/all.tcl" $(TESTFLAGS) -loadfile << > tests.log
package ifneeded dde 1.4.0 "$(TCLDDELIB:\=/)" dde]
package ifneeded registry 1.3.0 "$(TCLREGLIB:\=/)" registry]
<<
type tests.log | more
!endif
runtest: setup $(TCLTEST) dlls $(CAT32)
set TCL_LIBRARY=$(ROOT:\=/)/library
$(DEBUGGER) $(TCLTEST) $(SCRIPT)
runshell: setup $(TCLSH) dlls
set TCL_LIBRARY=$(ROOT:\=/)/library
$(DEBUGGER) $(TCLSH) $(SCRIPT)
setup:
@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)
!if !$(STATIC_BUILD)
$(TCLIMPLIB): $(TCLLIB)
!endif
$(TCLLIB): $(TCLOBJS)
!if $(STATIC_BUILD)
$(lib32) -nologo $(LINKERFLAGS) -out:$@ @<<
$**
<<
!else
$(link32) $(dlllflags) -base:@$(WINDIR)\coffbase.txt,tcl -out:$@ \
$(baselibs) @<<
$**
<<
$(_VC_MANIFEST_EMBED_DLL)
!endif
$(TCLSTUBLIB): $(TCLSTUBOBJS)
$(lib32) -nologo $(LINKERFLAGS) -nodefaultlib -out:$@ $(TCLSTUBOBJS)
$(TCLSH): $(TCLSHOBJS) $(TCLSTUBLIB) $(TCLIMPLIB)
$(link32) $(conlflags) -stack:2300000 -out:$@ $(baselibs) $**
$(_VC_MANIFEST_EMBED_EXE)
$(TCLTEST): $(TCLTESTOBJS) $(TCLSTUBLIB) $(TCLIMPLIB)
$(link32) $(conlflags) -stack:2300000 -out:$@ $(baselibs) $**
$(_VC_MANIFEST_EMBED_EXE)
!if $(STATIC_BUILD)
$(TCLDDELIB): $(TMP_DIR)\tclWinDde.obj
$(lib32) -nologo $(LINKERFLAGS) -out:$@ $**
!else
$(TCLDDELIB): $(TMP_DIR)\tclWinDde.obj $(TCLSTUBLIB)
$(link32) $(dlllflags) -base:@$(WINDIR)\coffbase.txt,tcldde -out:$@ \
$** $(baselibs)
$(_VC_MANIFEST_EMBED_DLL)
!endif
!if $(STATIC_BUILD)
$(TCLREGLIB): $(TMP_DIR)\tclWinReg.obj
$(lib32) -nologo $(LINKERFLAGS) -out:$@ $**
!else
$(TCLREGLIB): $(TMP_DIR)\tclWinReg.obj $(TCLSTUBLIB)
$(link32) $(dlllflags) -base:@$(WINDIR)\coffbase.txt,tclreg -out:$@ \
$** $(baselibs)
$(_VC_MANIFEST_EMBED_DLL)
!endif
pkgs:
@for /d %d in ($(PKGSDIR)\*) do \
@if exist "%~fd\win\makefile.vc" ( \
pushd "%~fd\win" & \
$(MAKE) -$(MAKEFLAGS) -f makefile.vc TCLDIR=$(ROOT) &\
popd \
)
test-pkgs:
@for /d %d in ($(PKGSDIR)\*) do \
@if exist "%~fd\win\makefile.vc" ( \
pushd "%~fd\win" & \
$(MAKE) -$(MAKEFLAGS) -f makefile.vc TCLDIR=$(ROOT) test &\
popd \
)
install-pkgs:
@for /d %d in ($(PKGSDIR)\*) do \
@if exist "%~fd\win\makefile.vc" ( \
pushd "%~fd\win" & \
$(MAKE) -$(MAKEFLAGS) -f makefile.vc TCLDIR=$(ROOT) install &\
popd \
)
clean-pkgs:
@for /d %d in ($(PKGSDIR)\*) do \
@if exist "%~fd\win\makefile.vc" ( \
pushd "%~fd\win" & \
$(MAKE) -$(MAKEFLAGS) -f makefile.vc TCLDIR=$(ROOT) clean &\
popd \
)
$(CAT32): $(WINDIR)\cat.c
$(cc32) $(CON_CFLAGS) -Fo$(TMP_DIR)\ $?
$(link32) $(conlflags) -out:$@ -stack:16384 $(TMP_DIR)\cat.obj \
$(baselibs)
$(_VC_MANIFEST_EMBED_EXE)
#---------------------------------------------------------------------
# Regenerate the stubs files. [Development use only]
#---------------------------------------------------------------------
genstubs:
!if !exist($(TCLSH))
@echo Build tclsh first!
!else
$(TCLSH) $(TOOLSDIR:\=/)/genStubs.tcl $(GENERICDIR:\=/) \
$(GENERICDIR:\=/)/tcl.decls $(GENERICDIR:\=/)/tclInt.decls \
$(GENERICDIR:\=/)/tclTomMath.decls
$(TCLSH) $(TOOLSDIR:\=/)/genStubs.tcl $(GENERICDIR:\=/) \
$(GENERICDIR:\=/)/tclOO.decls
!endif
#----------------------------------------------------------------------
# The following target generates the file generic/tclTomMath.h.
# It needs to be run (and the results checked) after updating
# to a new release of libtommath.
#----------------------------------------------------------------------
gentommath_h:
!if !exist($(TCLSH))
@echo Build tclsh first!
!else
$(TCLSH) "$(TOOLSDIR:\=/)/fix_tommath_h.tcl" \
"$(TOMMATHDIR:\=/)/tommath.h" \
> "$(GENERICDIR)\tclTomMath.h"
!endif
#---------------------------------------------------------------------
# Build the Windows HTML help file.
#---------------------------------------------------------------------
# NOTE: you can define HHC on the command-line to override this
!ifndef HHC
HHC=""%ProgramFiles%\HTML Help Workshop\hhc.exe""
!endif
HTMLDIR=$(ROOT)\html
HTMLBASE=TclTk$(VERSION)
HHPFILE=$(HTMLDIR)\$(HTMLBASE).hhp
CHMFILE=$(HTMLDIR)\$(HTMLBASE).chm
htmlhelp: chmsetup $(CHMFILE)
$(CHMFILE): $(DOCDIR)\*
@$(TCLSH) $(TOOLSDIR)\tcltk-man2html.tcl
@echo Compiling HTML help project
@$(HHC) <<$(HHPFILE) >NUL
[OPTIONS]
Compatibility=1.1 or later
Compiled file=$(HTMLBASE).chm
Display compile progress=no
Error log file=$(HTMLBASE).log
Language=0x409 English (United States)
Title=Tcl/Tk $(DOT_VERSION) Help
[FILES]
contents.htm
docs.css
Keywords
TclCmd
TclLib
TkCmd
TkLib
UserCmd
<<
chmsetup:
@if not exist $(HTMLDIR)\nul mkdir $(HTMLDIR)
#-------------------------------------------------------------------------
# Build the old-style Windows .hlp file
#-------------------------------------------------------------------------
TCLHLPBASE = $(PROJECT)$(VERSION)
HELPFILE = $(OUT_DIR)\$(TCLHLPBASE).hlp
HELPCNT = $(OUT_DIR)\$(TCLHLPBASE).cnt
DOCTMP_DIR = $(OUT_DIR)\$(PROJECT)_docs
HELPRTF = $(DOCTMP_DIR)\$(PROJECT).rtf
MAN2HELP = $(DOCTMP_DIR)\man2help.tcl
MAN2HELP2 = $(DOCTMP_DIR)\man2help2.tcl
INDEX = $(DOCTMP_DIR)\index.tcl
BMP = $(DOCTMP_DIR)\feather.bmp
BMP_NOPATH = feather.bmp
MAN2TCL = $(DOCTMP_DIR)\man2tcl.exe
winhelp: docsetup $(HELPFILE)
docsetup:
@if not exist $(DOCTMP_DIR)\nul mkdir $(DOCTMP_DIR)
$(MAN2HELP) $(MAN2HELP2) $(INDEX) $(BMP): $(TOOLSDIR)\$$(@F)
@$(CPY) $(TOOLSDIR)\$(@F) $(@D)
$(HELPFILE): $(HELPRTF) $(BMP)
cd $(DOCTMP_DIR)
start /wait hcrtf.exe -x <<$(PROJECT).hpj
[OPTIONS]
COMPRESS=12 Hall Zeck
LCID=0x409 0x0 0x0 ; English (United States)
TITLE=Tcl/Tk Reference Manual
BMROOT=.
CNT=$(@B).cnt
HLP=$(@B).hlp
[FILES]
$(PROJECT).rtf
[WINDOWS]
main="Tcl/Tk Reference Manual",,27648,(r15263976),(r65535)
[CONFIG]
BrowseButtons()
CreateButton(1, "Web", ExecFile("http://www.tcl.tk"))
CreateButton(2, "SF", ExecFile("http://sf.net/projects/tcl"))
CreateButton(3, "Wiki", ExecFile("http://wiki.tcl.tk"))
CreateButton(4, "FAQ", ExecFile("http://www.purl.org/NET/Tcl-FAQ/"))
<<
cd $(MAKEDIR)
@$(CPY) "$(DOCTMP_DIR)\$(@B).hlp" "$(OUT_DIR)"
@$(CPY) "$(DOCTMP_DIR)\$(@B).cnt" "$(OUT_DIR)"
$(MAN2TCL): $(TOOLSDIR)\$$(@B).c
$(cc32) $(TCL_CFLAGS) -Fo$(@D)\ $(TOOLSDIR)\$(@B).c
$(link32) $(conlflags) -out:$@ -stack:16384 $(@D)\man2tcl.obj
$(_VC_MANIFEST_EMBED_EXE)
$(HELPRTF): $(MAN2TCL) $(MAN2HELP) $(MAN2HELP2) $(INDEX) $(DOCDIR)\*
$(TCLSH) $(MAN2HELP) -bitmap $(BMP_NOPATH) $(PROJECT) $(VERSION) $(DOCDIR:\=/)
install-docs:
!if exist("$(CHMFILE)")
@echo Installing compiled HTML help
@$(CPY) "$(CHMFILE)" "$(DOC_INSTALL_DIR)\"
!endif
!if exist("$(HELPFILE)")
@echo Installing Windows help
@$(CPY) "$(HELPFILE)" "$(DOC_INSTALL_DIR)\"
@$(CPY) "$(HELPCNT)" "$(DOC_INSTALL_DIR)\"
!endif
#---------------------------------------------------------------------
# Build tclConfig.sh for the TEA build system.
#---------------------------------------------------------------------
tclConfig: $(OUT_DIR)\tclConfig.sh
$(OUT_DIR)\tclConfig.sh: $(WINDIR)\tclConfig.sh.in
@echo Creating tclConfig.sh
@nmakehlp -s << $** >$@
@TCL_DLL_FILE@ $(TCLLIBNAME)
@TCL_VERSION@ $(DOTVERSION)
@TCL_MAJOR_VERSION@ $(TCL_MAJOR_VERSION)
@TCL_MINOR_VERSION@ $(TCL_MINOR_VERSION)
@TCL_PATCH_LEVEL@ $(TCL_PATCH_LEVEL)
@CC@ $(CC)
@DEFS@ $(TCL_CFLAGS)
@CFLAGS_DEBUG@ -nologo -c -W3 -YX -Fp$(TMP_DIR)\ -MDd
@CFLAGS_OPTIMIZE@ -nologo -c -W3 -YX -Fp$(TMP_DIR)\ -MD
@LDFLAGS_DEBUG@ -nologo -machine:$(MACHINE) -debug -debugtype:cv
@LDFLAGS_OPTIMIZE@ -nologo -machine:$(MACHINE) -release -opt:ref -opt:icf,3
@TCL_DBGX@ $(SUFX)
@TCL_LIB_FILE@ $(PROJECT)$(VERSION)$(SUFX).lib
@TCL_NEEDS_EXP_FILE@
@LIBS@ $(baselibs)
@prefix@ $(_INSTALLDIR)
@exec_prefix@ $(BIN_INSTALL_DIR)
@SHLIB_CFLAGS@
@STLIB_CFLAGS@
@CFLAGS_WARNING@ -W3
@EXTRA_CFLAGS@ -YX
@SHLIB_LD@ $(link32) $(dlllflags)
@STLIB_LD@ $(lib32) -nologo
@SHLIB_LD_LIBS@ $(baselibs)
@SHLIB_SUFFIX@ .dll
@DL_LIBS@
@LDFLAGS@
@TCL_LD_SEARCH_FLAGS@
@LIBOBJS@
@RANLIB@
@TCL_LIB_FLAG@
@TCL_BUILD_LIB_SPEC@
@TCL_LIB_SPEC@ $(LIB_INSTALL_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
@TCL_INCLUDE_SPEC@ -I$(INCLUDE_INSTALL_DIR)
@TCL_LIB_VERSIONS_OK@
@TCL_SRC_DIR@ $(ROOT)
@TCL_PACKAGE_PATH@
@TCL_STUB_LIB_FILE@ $(TCLSTUBLIBNAME)
@TCL_STUB_LIB_FLAG@ $(TCLSTUBLIBNAME)
@TCL_STUB_LIB_SPEC@ -L$(LIB_INSTALL_DIR) $(TCLSTUBLIBNAME)
@TCL_THREADS@ $(TCL_THREADS)
@TCL_BUILD_STUB_LIB_SPEC@ -L$(OUT_DIR) $(TCLSTUBLIBNAME)
@TCL_BUILD_STUB_LIB_PATH@ $(TCLSTUBLIB)
@TCL_STUB_LIB_PATH@ $(LIB_INSTALL_DIR)\$(TCLSTUBLIBNAME)
@CFG_TCL_EXPORT_FILE_SUFFIX@ $(VERSION)$(SUFX).lib
@CFG_TCL_SHARED_LIB_SUFFIX@ $(VERSION)$(SUFX).dll
@CFG_TCL_UNSHARED_LIB_SUFFIX@ $(VERSION)$(SUFX).lib
!if $(STATIC_BUILD)
@TCL_SHARED_BUILD@ 0
!else
@TCL_SHARED_BUILD@ 1
!endif
<<
#---------------------------------------------------------------------
# The following target generates the file generic/tclDate.c
# from the yacc grammar found in generic/tclGetDate.y. This is
# only run by hand as yacc is not available in all environments.
# The name of the .c file is different than the name of the .y file
# so that make doesn't try to automatically regenerate the .c file.
#---------------------------------------------------------------------
gendate:
bison --output-file=$(GENERICDIR)/tclDate.c \
--name-prefix=TclDate \
$(GENERICDIR)/tclGetDate.y
#---------------------------------------------------------------------
# Special case object file targets
#---------------------------------------------------------------------
$(TMP_DIR)\testMain.obj: $(WINDIR)\tclAppInit.c
$(cc32) $(TCL_CFLAGS) -DTCL_TEST \
-DTCL_USE_STATIC_PACKAGES=$(TCL_USE_STATIC_PACKAGES) \
-Fo$@ $?
$(TMP_DIR)\tclMain2.obj: $(GENERICDIR)\tclMain.c
$(cc32) $(TCL_CFLAGS) -DBUILD_tcl -DTCL_ASCII_MAIN \
-Fo$@ $?
$(TMP_DIR)\tclTest.obj: $(GENERICDIR)\tclTest.c
$(cc32) $(TCL_CFLAGS) -Fo$@ $?
$(TMP_DIR)\tclTestObj.obj: $(GENERICDIR)\tclTestObj.c
$(cc32) $(TCL_CFLAGS) -Fo$@ $?
$(TMP_DIR)\tclWinTest.obj: $(WINDIR)\tclWinTest.c
$(cc32) $(TCL_CFLAGS) -Fo$@ $?
$(TMP_DIR)\tclZlib.obj: $(GENERICDIR)\tclZlib.c
$(cc32) $(TCL_CFLAGS) -I$(COMPATDIR)\zlib -DBUILD_tcl -Fo$@ $?
$(TMP_DIR)\tclPkgConfig.obj: $(GENERICDIR)\tclPkgConfig.c
$(cc32) -DBUILD_tcl $(TCL_CFLAGS) \
-DCFG_INSTALL_LIBDIR="\"$(LIB_INSTALL_DIR:\=\\)\"" \
-DCFG_INSTALL_BINDIR="\"$(BIN_INSTALL_DIR:\=\\)\"" \
-DCFG_INSTALL_SCRDIR="\"$(SCRIPT_INSTALL_DIR:\=\\)\"" \
-DCFG_INSTALL_INCDIR="\"$(INCLUDE_INSTALL_DIR:\=\\)\"" \
-DCFG_INSTALL_DOCDIR="\"$(DOC_INSTALL_DIR:\=\\)\"" \
-DCFG_RUNTIME_LIBDIR="\"$(LIB_INSTALL_DIR:\=\\)\"" \
-DCFG_RUNTIME_BINDIR="\"$(BIN_INSTALL_DIR:\=\\)\"" \
-DCFG_RUNTIME_SCRDIR="\"$(SCRIPT_INSTALL_DIR:\=\\)\"" \
-DCFG_RUNTIME_INCDIR="\"$(INCLUDE_INSTALL_DIR:\=\\)\"" \
-DCFG_RUNTIME_DOCDIR="\"$(DOC_INSTALL_DIR:\=\\)\"" \
-Fo$@ $?
$(TMP_DIR)\tclAppInit.obj: $(WINDIR)\tclAppInit.c
$(cc32) $(TCL_CFLAGS) \
-DTCL_USE_STATIC_PACKAGES=$(TCL_USE_STATIC_PACKAGES) \
-Fo$@ $?
### The following objects should be built using the stub interfaces
### *ALL* extensions need to built with -DTCL_THREADS=1
$(TMP_DIR)\tclWinReg.obj: $(WINDIR)\tclWinReg.c
!if $(STATIC_BUILD)
$(cc32) $(TCL_CFLAGS) -DTCL_THREADS=1 -DSTATIC_BUILD -Fo$@ $?
!else
$(cc32) $(TCL_CFLAGS) -DTCL_THREADS=1 -DUSE_TCL_STUBS -Fo$@ $?
!endif
$(TMP_DIR)\tclWinDde.obj: $(WINDIR)\tclWinDde.c
!if $(STATIC_BUILD)
$(cc32) $(TCL_CFLAGS) -DTCL_THREADS=1 -DSTATIC_BUILD -Fo$@ $?
!else
$(cc32) $(TCL_CFLAGS) -DTCL_THREADS=1 -DUSE_TCL_STUBS -Fo$@ $?
!endif
### The following objects are part of the stub library and should not
### be built as DLL objects. -Zl is used to avoid a dependency on any
### specific C run-time.
$(TMP_DIR)\tclStubLib.obj: $(GENERICDIR)\tclStubLib.c
$(cc32) $(STUB_CFLAGS) -Zl -DSTATIC_BUILD $(TCL_INCLUDES) -Fo$@ $?
$(TMP_DIR)\tclTomMathStubLib.obj: $(GENERICDIR)\tclTomMathStubLib.c
$(cc32) $(STUB_CFLAGS) -Zl -DSTATIC_BUILD $(TCL_INCLUDES) -Fo$@ $?
$(TMP_DIR)\tclOOStubLib.obj: $(GENERICDIR)\tclOOStubLib.c
$(cc32) $(STUB_CFLAGS) -Zl -DSTATIC_BUILD $(TCL_INCLUDES) -Fo$@ $?
$(TMP_DIR)\tclsh.exe.manifest: $(WINDIR)\tclsh.exe.manifest.in
@nmakehlp -s << $** >$@
@MACHINE@ $(MACHINE:IX86=X86)
@TCL_WIN_VERSION@ $(DOTVERSION).0.0
<<
#---------------------------------------------------------------------
# Generate the source dependencies. Having dependency rules will
# improve incremental build accuracy without having to resort to a
# full rebuild just because some non-global header file like
# tclCompile.h was changed. These rules aren't needed when building
# from scratch.
#---------------------------------------------------------------------
depend:
!if !exist($(TCLSH))
@echo Build tclsh first!
!else
$(TCLSH) $(TOOLSDIR:\=/)/mkdepend.tcl -vc32 -out:"$(OUT_DIR)\depend.mk" \
-passthru:"-DBUILD_tcl $(TCL_INCLUDES)" $(GENERICDIR),$$(GENERICDIR) \
$(COMPATDIR),$$(COMPATDIR) $(TOMMATHDIR),$$(TOMMATHDIR) $(WINDIR),$$(WINDIR) @<<
$(TCLOBJS)
<<
!endif
#---------------------------------------------------------------------
# Dependency rules
#---------------------------------------------------------------------
!if exist("$(OUT_DIR)\depend.mk")
!include "$(OUT_DIR)\depend.mk"
!message *** Dependency rules in use.
!else
!message *** Dependency rules are not being used.
!endif
### add a spacer in the output
!message
#---------------------------------------------------------------------
# Implicit rules. A limitation exists with nmake that requires that
# source directory can not contain spaces in the path. This an
# absolute.
#---------------------------------------------------------------------
{$(WINDIR)}.c{$(TMP_DIR)}.obj::
$(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<<
$<
<<
{$(TOMMATHDIR)}.c{$(TMP_DIR)}.obj::
$(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<<
$<
<<
{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
$(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<<
$<
<<
{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
$(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<<
$<
<<
{$(COMPATDIR)\zlib}.c{$(TMP_DIR)}.obj::
$(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<<
$<
<<
{$(WINDIR)}.rc{$(TMP_DIR)}.res:
$(rc32) -fo $@ -r -i "$(GENERICDIR)" -i "$(TMP_DIR)" \
-d DEBUG=$(DEBUG) -d UNCHECKED=$(UNCHECKED) \
-d TCL_THREADS=$(TCL_THREADS) \
-d STATIC_BUILD=$(STATIC_BUILD) \
$<
$(TMP_DIR)\tclsh.res: $(TMP_DIR)\tclsh.exe.manifest
.SUFFIXES:
.SUFFIXES:.c .rc
#---------------------------------------------------------------------
# Installation.
#---------------------------------------------------------------------
install-binaries:
@echo Installing to '$(_INSTALLDIR)'
@echo Installing $(TCLLIBNAME)
!if "$(TCLLIB)" != "$(TCLIMPLIB)"
@$(CPY) "$(TCLLIB)" "$(BIN_INSTALL_DIR)\"
!endif
@$(CPY) "$(TCLIMPLIB)" "$(LIB_INSTALL_DIR)\"
!if exist($(TCLSH))
@echo Installing $(TCLSHNAME)
@$(CPY) "$(TCLSH)" "$(BIN_INSTALL_DIR)\"
!endif
@echo Installing $(TCLSTUBLIBNAME)
@$(CPY) "$(TCLSTUBLIB)" "$(LIB_INSTALL_DIR)\"
#" emacs fix
install-libraries: tclConfig install-msgs install-tzdata
@if not exist "$(SCRIPT_INSTALL_DIR)$(NULL)" \
$(MKDIR) "$(SCRIPT_INSTALL_DIR)"
@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8$(NULL)" \
$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8"
@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.2$(NULL)" \
$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.2"
@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.3$(NULL)" \
$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.3"
@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4$(NULL)" \
$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4"
@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\platform$(NULL)" \
$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\platform"
@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5$(NULL)" \
$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5"
@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.6$(NULL)" \
$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.6"
@echo Installing header files
@$(CPY) "$(GENERICDIR)\tcl.h" "$(INCLUDE_INSTALL_DIR)\"
@$(CPY) "$(GENERICDIR)\tclDecls.h" "$(INCLUDE_INSTALL_DIR)\"
@$(CPY) "$(GENERICDIR)\tclOO.h" "$(INCLUDE_INSTALL_DIR)\"
@$(CPY) "$(GENERICDIR)\tclOODecls.h" "$(INCLUDE_INSTALL_DIR)\"
@$(CPY) "$(GENERICDIR)\tclPlatDecls.h" "$(INCLUDE_INSTALL_DIR)\"
@$(CPY) "$(GENERICDIR)\tclTomMath.h" "$(INCLUDE_INSTALL_DIR)\"
@$(CPY) "$(GENERICDIR)\tclTomMathDecls.h" "$(INCLUDE_INSTALL_DIR)\"
@$(CPY) "$(TOMMATHDIR)\tommath_class.h" "$(INCLUDE_INSTALL_DIR)\"
@$(CPY) "$(TOMMATHDIR)\tommath_superclass.h" "$(INCLUDE_INSTALL_DIR)\"
@echo Installing library files to $(SCRIPT_INSTALL_DIR)
@$(CPY) "$(ROOT)\library\history.tcl" "$(SCRIPT_INSTALL_DIR)\"
@$(CPY) "$(ROOT)\library\init.tcl" "$(SCRIPT_INSTALL_DIR)\"
@$(CPY) "$(ROOT)\library\clock.tcl" "$(SCRIPT_INSTALL_DIR)\"
@$(CPY) "$(ROOT)\library\tm.tcl" "$(SCRIPT_INSTALL_DIR)\"
@$(CPY) "$(ROOT)\library\parray.tcl" "$(SCRIPT_INSTALL_DIR)\"
@$(CPY) "$(ROOT)\library\safe.tcl" "$(SCRIPT_INSTALL_DIR)\"
@$(CPY) "$(ROOT)\library\tclIndex" "$(SCRIPT_INSTALL_DIR)\"
@$(CPY) "$(ROOT)\library\package.tcl" "$(SCRIPT_INSTALL_DIR)\"
@$(CPY) "$(ROOT)\library\word.tcl" "$(SCRIPT_INSTALL_DIR)\"
@$(CPY) "$(ROOT)\library\auto.tcl" "$(SCRIPT_INSTALL_DIR)\"
@$(CPY) "$(OUT_DIR)\tclConfig.sh" "$(LIB_INSTALL_DIR)\"
@$(CPY) "$(WINDIR)\tclooConfig.sh" "$(LIB_INSTALL_DIR)\"
@echo Installing library http1.0 directory
@$(CPY) "$(ROOT)\library\http1.0\*.tcl" \
"$(SCRIPT_INSTALL_DIR)\http1.0\"
@echo Installing library opt0.4 directory
@$(CPY) "$(ROOT)\library\opt\*.tcl" \
"$(SCRIPT_INSTALL_DIR)\opt0.4\"
@echo Installing package http $(PKG_HTTP_VER) as a Tcl Module
@$(COPY) "$(ROOT)\library\http\http.tcl" \
"$(SCRIPT_INSTALL_DIR)\..\tcl8\8.6\http-$(PKG_HTTP_VER).tm"
@echo Installing package msgcat $(PKG_MSGCAT_VER) as a Tcl Module
@$(COPY) "$(ROOT)\library\msgcat\msgcat.tcl" \
"$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5\msgcat-$(PKG_MSGCAT_VER).tm"
@echo Installing package tcltest $(PKG_TCLTEST_VER) as a Tcl Module
@$(COPY) "$(ROOT)\library\tcltest\tcltest.tcl" \
"$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5\tcltest-$(PKG_TCLTEST_VER).tm"
@echo Installing package platform $(PKG_PLATFORM_VER) as a Tcl Module
@$(COPY) "$(ROOT)\library\platform\platform.tcl" \
"$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\platform-$(PKG_PLATFORM_VER).tm"
@echo Installing package platform::shell $(PKG_SHELL_VER) as a Tcl Module
@$(COPY) "$(ROOT)\library\platform\shell.tcl" \
"$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\platform\shell-$(PKG_SHELL_VER).tm"
@echo Installing $(TCLDDELIBNAME)
!if $(STATIC_BUILD)
!if !$(TCL_USE_STATIC_PACKAGES)
@$(CPY) "$(TCLDDELIB)" "$(LIB_INSTALL_DIR)\"
!endif
!else
@$(CPY) "$(TCLDDELIB)" "$(LIB_INSTALL_DIR)\dde$(DDEDOTVERSION)\"
@$(CPY) "$(ROOT)\library\dde\pkgIndex.tcl" \
"$(LIB_INSTALL_DIR)\dde$(DDEDOTVERSION)\"
!endif
@echo Installing $(TCLREGLIBNAME)
!if $(STATIC_BUILD)
!if !$(TCL_USE_STATIC_PACKAGES)
@$(CPY) "$(TCLREGLIB)" "$(LIB_INSTALL_DIR)\"
!endif
!else
@$(CPY) "$(TCLREGLIB)" "$(LIB_INSTALL_DIR)\reg$(REGDOTVERSION)\"
@$(CPY) "$(ROOT)\library\reg\pkgIndex.tcl" \
"$(LIB_INSTALL_DIR)\reg$(REGDOTVERSION)\"
!endif
@echo Installing encodings
@$(CPY) "$(ROOT)\library\encoding\*.enc" \
"$(SCRIPT_INSTALL_DIR)\encoding\"
#" emacs fix
install-tzdata:
@echo Installing time zone data
@set TCL_LIBRARY=$(ROOT:\=/)/library
@$(TCLSH_NATIVE) "$(ROOT:\=/)/tools/installData.tcl" \
"$(ROOT:\=/)/library/tzdata" "$(SCRIPT_INSTALL_DIR)/tzdata"
install-msgs:
@echo Installing message catalogs
@set TCL_LIBRARY=$(ROOT:\=/)/library
@$(TCLSH_NATIVE) "$(ROOT:\=/)/tools/installData.tcl" \
"$(ROOT:\=/)/library/msgs" "$(SCRIPT_INSTALL_DIR)/msgs"
#---------------------------------------------------------------------
# Clean up
#---------------------------------------------------------------------
tidy:
!if "$(TCLLIB)" != "$(TCLIMPLIB)"
@echo Removing $(TCLLIB) ...
@if exist $(TCLLIB) del $(TCLLIB)
!endif
@echo Removing $(TCLIMPLIB) ...
@if exist $(TCLIMPLIB) del $(TCLIMPLIB)
@echo Removing $(TCLSH) ...
@if exist $(TCLSH) del $(TCLSH)
@echo Removing $(TCLTEST) ...
@if exist $(TCLTEST) del $(TCLTEST)
@echo Removing $(TCLDDELIB) ...
@if exist $(TCLDDELIB) del $(TCLDDELIB)
@echo Removing $(TCLREGLIB) ...
@if exist $(TCLREGLIB) del $(TCLREGLIB)
clean: clean-pkgs
@echo Cleaning $(TMP_DIR)\* ...
@if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
@echo Cleaning $(WINDIR)\nmakehlp.obj ...
@if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj
@echo Cleaning $(WINDIR)\nmakehlp.exe ...
@if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
@echo Cleaning $(WINDIR)\_junk.pch ...
@if exist $(WINDIR)\_junk.pch del $(WINDIR)\_junk.pch
@echo Cleaning $(WINDIR)\vercl.x ...
@if exist $(WINDIR)\vercl.x del $(WINDIR)\vercl.x
@echo Cleaning $(WINDIR)\vercl.i ...
@if exist $(WINDIR)\vercl.i del $(WINDIR)\vercl.i
@echo Cleaning $(WINDIR)\versions.vc ...
@if exist $(WINDIR)\versions.vc del $(WINDIR)\versions.vc
realclean: hose
hose:
@echo Hosing $(OUT_DIR)\* ...
@if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)
